What is Tungsten Carbide Saw Blade?
Tungsten carbide saw blades can be simplified as TCT saw blades. Tungsten carbide saw blade is the most commonly used wood products processing cutting tools. The quality of carbide saw blade and processing are closely related. Reasonable selection of carbide saw blades is important for improving product quality ,shortening the processing time, reducing processing costs. Tungsten carbide saw blade contains the type of substrate material, diameter, number of teeth, thickness, profile, angle, aperture and other parameters, which determine the processing capacity and cutting blade. Selecting the blade for cutting materials should take the type, thickness, cutting speed, cutting direction, feed speed, road width of the need into consideration.

Proper use of tungsten carbide saw blade.
Basic requirements of TCT saw blades:

According to equipment design and select the most appropriate carbide saw blade.
The equipment shall be equipped with safety devices, such as: protective cover, power brakes, overload protection.
installation, and wear work clothes, wearing goggles, earmuffs etc. should be operated under a professional operator
Operators can not wear gloves, and long hair should be put inside the cap in order to prevent danger.
Away from fire and humid environment.
Installation requirements of tungsten carbide saw blades:

the equipment should be in good condition. No distortion in spindle, no path hop, no vibration and so on.
checking the state of blade, tooth is complete, the saw plate is smooth and clean, and presence of other anomalies, in order to ensure safe use.
direction of the arrow blade should be the same with spindle rotation direction when     assemblly.
saw the installation to maintain the axis, a chuck and flange for cleaning, blade flange diameter and the same diameter, flange and blade to ensure close integration of pins installed, tighten the nut. Flange size should be appropriate, shall not be less than the diameter of the saw blade diameter of 1 / 3.
Before starting the device, the safety of the situation should be ensured. A single person should operate equipment, jog idling, check the device is turned to the right without vibration, and the saw blade should be installed a few minutes after the first spin.