Medical device_syringe double injection mold:JK-MOLD offer one station solution of all
medical device double injection mold.
Machining accuracy,design circle time,cooling solution and ejecting system are very
important factor for the  Medical syrange precision mold.Machining accuracy of precision
thin-walled sylinge mold:averange thickness wall is only 0.6mm which need high quality
inserts and close tolerance core bushing to make precision alignment.also there is
another measure employed into structure to guarantee the center alignment between
core and cavity during molding.Because even a little mismatch will cause the short-shot.

The molding circle time of syringe thin-walled mold is only 9s,which need exact
caculation and serious moldflow analysis for the gating system,ejecting system and
cooling system before mold making.The action should be smooth and stable during
high-speed ejection,the part will be damaged by ejector if could not take off the part within
9s.That is why we need enough cooling lines to guarantee these system can cool the
part within 3-4 seconds.

Below is general principle for the syringe thin-walled mold:
1)LKM molbbase with HUSKY hot runner system.
2)PP material and 1x8-cavity and the molding circle time is 9s.
3)Hascoe or same level mold standard components.
4)BAST1/4" PLUG and 4 groups cooling lines.
With built 300 different kinds of syringe thin-walled mold in past  years,
JK-MOLD get much more rich experince and can offer
one-station solution for the thin-walled mold making and molding.
Your confidence guarantor--JK-MOLD.www.jk-mold.com