NCM Battery Cathode Materials For Automotive Battery Manufacturing Process
Negotiable /Piece
Min.Order:1 Piece
NCM Battery Materials For Batteries Manufacturing Process , Car Battery Materials
NCM Cathode Material Lithium Nickel Cobalt Manganese Oxide Black Powder
NCM Cathode Recycled Raw Materials With 3.10 G/Cm3 Compact Density 10.90 Ph
LiMn2O4 Battery Cathode Materials For Electric Bicycle Battery Pack PONY CE MSDS
Lithium Manganese Oxide LiMn2O4 Battery Cathode Materials Black Powder Long Cycle Life
Lifepo4 Automotive Battery Materials High Density D50 0.8 - 3.0M Average Particle Size
Excellent cycle At High Temperature NCM Battery Cathode Material For E Tools , BEV Battery
specification
Item | Unit |
SN3B(Power type) Typical value/ Control standards |
|
Particle size distribution | D10 | µm | 6.6(≥5.0) |
D50 | µm | 10.3(7.0~12.0) | |
D90 | µm | 20.5(≤30.0) | |
Specific surface area | m2/g | 0.45(0.30~0.60) | |
pH | / | 11.58(≤11.70) | |
Tap density | g/cm3 | 2.35(≥2.10) | |
Compact density | g/cm3 | 3.45(≥3.20) | |
Initial discharge capacity (vs.Li, 0.2C) |
mAh/g | 178.0(≥175.0) | |
Initial charge-discharge efficiency | % | 86.1(≥85.0) | |
Capacity retention ration after 500 cycles | % | 83.2(≥80,55℃) |
Discription
1. Type: SN3B
2. Module: Good cyclelife type of Lithium Nickel-cobalt-manganese Oxide
3. Characteristics: High energy density, high capacity, longer cycle time at high temperature and lower cost etc.
Charge and discharge curve
Cycle curve at 55 high temperature