Delivery Time:20-25 days
Certification:ROHS ,MSDS ,CE
Deep Cycle life 12V 30Ah UPS Replacement Battery For UPS , Solar System And UPS
Specifications:
| Item | Parameter | Remark | ||
| Rating Voltage | 12V | |||
| Capacity | Typical:20Ah | 0.2C discharge after full charge.. | ||
| Charge Voltage | 12.6V | |||
| Impedance | 80mΩ(Max) | |||
| Charging Mode | C.C/C.V. |
Constant Current /Constant Voltage |
||
| Charging Metho | Standard Charging 0.2C | Charging Current 4000mA | ||
| Charging Time | Standard Charging | (5-6)Hours | ||
|
End of Discharge Voltage |
9.0V | |||
| Maximum size battery pack | 86mm*70mm*155mm | |||
| Operating Temperature | Charging | 0～45℃ | ||
|
Discharging |
(-20～60)℃ | |||
| Storage Temperature |
(-10℃～35)℃ Recommend(25±5℃) |
Storage capacity should be 40%~50% full charge capacity | ||
| Cycle Life | 1000 cycle | 0.5C charge and discharge | ||
A UPS battery is short for uninterruptible power supply. It is designed to be used with various electronics, especially computers and telecom systems where a power outage could potentially be catastrophic, it’s actually be used on numerous industry in your home and business .
Battery pack Performance:
1, Longer Cycle Life: the capacity can stay 80% min after Over 2000 cycles
2, Lower cost : the longer cycle life can balanced the cost of the battery than the lead-acid battery ,can save the cost
3, without Memory Effective: Always ready for charge and use, without need to charge again after a full discharge.
4, Wide working Temperature ranges: can be used in the temperature ranges from -20° C to 65° C
5, Intelligent Charge System: Voltage of each battery can be detected and protected against overcharge, overvoltage, short circuit and overheat and balanced function, can read out the capacity of each cells
Applications:
1.Pure and hybrid electric car, electric bus , electric vehicles , recreational vehicles
lar and wind energy storage , solar streetlights ,household energy storage
munication base station and utility power supply ,emergency power supply
Shipment :
1. Based on the character of cell, need to make an environment for transportation of LiFePO4 battery pack
2. Battery should be keep at -20°C~45°C in warehouse where it’s dry, clean and well-ventilated environment .
3. when delivery , we must pay more attention :dropping, extrusion and serious stacking.
