Rechargeable 
portable LED lamp / 
Rechargeable 21+5 LED Akku hand 
lamp

Features:
1. Cordless for practical use
2. Suitable for professional and DIY use
3. 5 additional LED’s in the base
4. LED-High Luminous power (15000MCD)
5. Li-On 3.6V (1000mAh): Compared with NiMH-battery double life time, no memory effect
6. Built-in magnetic holder
7. Retractable suspension hook
8. Up to 3 hours between charges
9. 110-240V AC adatper and 12V car adapter
10. Rubber-coated housing

TECHNICAL DATA – Power voltage – Power and IP as specified on the model plate
POWER CONNECTION- Verify that the voltage of the battery charger corresponds to that of the 
system. Use the lamp within places prescribed and governed by current regulations on 
workplaces and electrical systems. Check that the plug fitted on the cable is suitable for the 
work environment; if it is not, it must be replaced.
INSTRUCTIONS FOR USE – Plug into a suitable socket. Always check that the device is operating 
efficiently and that it is not affected by faults that could impair safety: do not remove the 
guards. Do not open the device: maintenance must be performed by skilled personnel only. The 
lamp is supplied with discharged batteries. Connect the lamp to the battery charger. Don’t 
exceed 24h recharge time to avoid battery damage. Do not disassemble the battery charger 
neither the lamp: an improper assembling may imply risks of malfunctioning or permanent 
damages. When recharging, both the battery charger and the lamp would slightly warm up. This 
is normal. 
ACCESSORIES AND SPARE PARTS – Use only accessories and spare parts approved by the 
manufacturer.
GENERAL PRECAUTIONS – The choice and the use of components have been made taking into account 
the conditions of use and the anticipated working life-span of the lamp. Install the lamp in 
such a way as not to pose any hazard for exposed people, as long as it is used correctly. No 
guards or signals will ever be enough unless the user takes proper precautions, the lamp is 
kept in good condition and the instructions below are precisely followed. Learn how to use the 
lamp properly before starting any jobs. Make sure the person using the lamp does so in a safe 
way and that he/she knows how it works. Avoid exposing yourself or other people to pointless 
risks. Do don’t remove, modify or disconnect THE SAFETY DEVICES fitted by the manufacturer, 
but check that these are not removed or that their efficiency has not been reduced. Keep the 
work area free of any tools and any other unnecessary objects.