Reliable Pressure Blast Cabinet , Industrial Sandblasting Cabinet For Surface Treatment

Specifications:

Description:

Pressure Systems utilize a pressure pot that incinerates the media from the pot through the blast hose, to the nozzle. A direct pressure unit has the same amount of pressure in the pressure pot vessel. Passing through the air line, it connects to the outlet of the abrasive metering valve.

Sometimes direct pressure systems are referred to as gravity fed or equal pressure units.While the abrasive “free flows” into the air stream, the operator can better control or direct the blasting process at both low and high pressures.

In most applications, work can be done four times faster than with a siphon sandblast cabinet as the abrasive is delivered at a much higher velocity.

Applications:

sandblasting rust, corrosion and paint on large parts in a enclosed cabinet to keep dust off the floor and out of the air. It’s with heavy steel construction, single door on the side and also transparent glass viewing window.

Competitive Advantage:

 Low initial cost

 Tungsten carbide nozzle

 12 gage steel air tight construction

 Integral dust collector with fan on clean air side

 Uses any dry abrasive

 No moving parts

 Little skill to operate

 Very low maintenance

 No venting required