Energy conservation TDS meter

Energy conservation

1 Range: 0~9990ppm (mg/L)

2 Operating Temperature: 0~50°C

3 TDS meter accuracy: ±2%F. S

4 TDS meter environment:0 to 99°C (32 to 212°F)

5 TDS meter Calibration: Factory Calibrated

6 TDS meter Energy conservation

7 Operating Temperature: 0~50°C

8 Power source: 2×1.5v(button cell)

9 Temperature Compensation:Automatic

10 TDS meter Easy to change the electrode

11 size: 142X 25X15mm

12 weight: 36g

OPERATING  INSTRUCTIONS

1.remove the protective cap.

the ON/OFF button once out of the water. The tester will read “000”

3. Immerse the tester into the water no more than 2 inches.

4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.

the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.

6.after usage, shake off the water from your tester or wipe it with a tissue.

Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.