Fluedust briquette machine

1. 1.    Productintroduction:

Fluedust briquette machine can be used to suppress the coal, iron, aluminum, ironpin, iron oxide, carbon powder, slag, tailings, kaolin, sponge iron, allpowder, powder, waste, waste, widely used in refractories, power plant,metallurgy, chemical industry, energy, transport, heating and other industry,the flue ash pressure ball machine production molding material, environmentalprotection and energy saving, convenient transportation, improve theutilization rate of the material, and has good economic benefit and socialbenefit.

1. 2.    Structureprinciple:

Flueash pressure ball machine structure principle is: flue ash pressure ballmachine as long as the structure of the transmission system, the main frame,reducer, belt conveyor, preloading device, and set the ball groove of thepositioning device, hydraulic system and electric control etc. several partscomposition. Continuous rotation bite into the material of roll to roll to rollto material quantitative, uniformly adding pressure ball machine preloadingdevice makes the pre pressing device to maintain the stability of the material,and then by preloading device preloading spiral material is forced to press onand in the middle of material pre compression and transmission to twoarc-shaped notch, two surface uniform distribution of the same shape and nest,the gear to rotate, so that two uniform, reverse rotation, will be transportedto the notch groove and forced compression, with the roller to rotate, theelasticity and gravity take off the ball, with the motor pressure and periodicrotation of the repressive movement, realize batch production.

1. 3.    Materialrequirement:

2. 1.    Materialdynamics control in less than 1mm of particles should be in 30-40%; 1mm to 2mmparticles should be in the 30-40%, the maximum particle size should be lessthan 3mm of the particles should be around 10%.

3. 2.    Moisturecontrol in 5% (the number of water on the impact of the ball into the maximum,a little more than a little less, absolutely guaranteed water uniformity,should pay special attention to).

4. 3.    Materialabsolutely does not allow iron or other high hardness block or other highhardness of massive debris so as not to damage the stick forming machine andshaft using department should be in process in the preparation of installationin addition to part of the iron.

Gongyi Fu Yu Machinery Co., Ltd. is specialized inthe production of pressure ball machine, welcome to consult the factory,telephone 86-18538292735, . E-mail:fybriquettemachine@yahoo.com.