Oil Skimmer used to many industry such machinning center that use oil coolant.
 Kowa develops waste disposal equipment and energy-saving, resource-saving, and labor-saving equipment for global environmental protection. Among others, " Q pot system" ( Quick SuctionPot System) , our internationally patented drain disposal system has no equal in the collection of floating substances and is a landmark piece of equipment. With these unique technologies, Kowa contributes to the purification and recycling of water which covers the greater part of the earth.
 
 A. Mineral oil collecting equipment
 1. MINI-SKIMMER MS-B
 Features
 -Name/ Model     MINI-SKIMMER [ MS-B]
 Outside dimensions : 88 x 426 x 257h ( excluding projections)
 Separating tank : 161 x 313 x 257h, Weight : approx. 5kg, apacity : 5.6 lit.
 Pump section : 188 x 117 x 237, Weight : approx. 4kg
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output :      25W, built-in thermal protector
 Q pot     85 x 100st Material: NBR
 Throughput : 60 lit./ hr, suction head: 50cm
 Heat resistance : 0-40, indoor use
 
 Applications
 - Collection of floating oil in the coolant tanks of machine tools
 - Collection of floating oil in oil and water separating tanks
 - Removal of floating oil in the process cleaning of machined parts
 - Removal of oil mixed in cooling water
 - Removal of oil floating on drainage from compressors
 
 2. YUTORI ACE YA-B
 Outside dimensions : 180 x 590 x 485h ( excluding projections)
 Separating tank : 180 x 420 x 430h, weight: approx. 24kg, capacity: 25 lit.
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output : 40W, built-in thermal protector
 Controller : Gearless variable speed
 Timer : Automatic operation ( start and stop) is available at intervals of between 0 and 6 hours.
 Q pot : 85 x 100st Material : NBR
 Throughput : 60 lit./ hr, suction head: 120cm
 Heat resistance : 0-40, indoor use
 
 Features
 - The YUTORI ACE is compact, and can be transported and installed anywhere.
 - Oil and water can be separated accurately by the high performance separating tank.
 - Operation ( start and stop) by means of a timer is available ( 1 sec. - 6 hrs.)
 - The Q pot follows the liquid level at a 100mm stroke.
 - Throughput and speed can be adjusted.
 
 Applications
 - Collection of floating oil in the coolant tanks of machine tools
 - Collection of floating oil in oil and water separating tanks
 - Removal of floating oil in the process cleaning of machined parts
 - Removal of oil mixed in cooling water
 - Removal of oil floating on drainage from compressors
 
 3. GREASE BOY I GB-V
 Outside dimensions : 180 x 470 x 600h ( excluding projections)
 Separating tank : 180 x 420 x 430h, weight : approx. 24kg, capacity: 25 lit.
 Control panel : 120 x 400 x 400h, weight : approx. 14kg, sequencer control
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output : 70W, Small diaphragm vacuum pump
 Timer : Automatic operation ( start and stop) is available at intervals of between 0 and 6 hours.
 Q pot : 85 x 100st Material: NBR
 Throughput : 60 lit./ hr.( max.) , suction head: 200cm
 Heat resistance : 0 - 40, indoor use
 
 Features
 - The GREASE BOY I is compact, and can be transported and installed anywhere.
 - Oil and water can be separated accurately by the high performance
 - The Q pot follows the liquid level at a 100mm stroke.
 -Because the small vacuum pump is used, the GREASE BOY û can deal with a high suction head and fluid with high viscosity.
 - Operation ( start and stop) by means of a timer is available ( 1 sec. - 6 hrs.)
 
 Applications
 - Collection of floating oil in the coolant tanks of machine tools
 - Collection of floating oil in oil and water separating tanks
 - Removal of floating oil in the process cleaning of machined parts
 - Removal of oil mixed in cooling water
 - Removal of oil floating on drainage from compressor
 
 4. SL SEPARATOR
 Features
 - Regardless of solid or liquid ( oils, fats, or scum) , all floating substances, oils, and fats can be collected and separated.
 - Mineral oils and animal and vegetable oils can also be dealt with.
 - One unit of the SL SEPARATOR can deal with a broad surface.
 - High-speed collection
 - With the built-in digital timer, highly effective automatic operation is provided.
 
 a. SL-L type ( collection of liquid oil)
 Outside dimensions : 270 x 710 x 700h ( excluding projections)
 Separating tank : 270 x 600 x 500h, weight: approx. 30kg, capacity: 65 lit.
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output : 100W, Underwater pump ( 2P)
 Controller : 50 - 100% , Gearless variable speed
 Timer : Digital 24-hour time switch ( power failure guarantee) Starting times can be set up to 28 times a day ( minimum unit: 1 minute) Operating time, day, and long-term holidays can be specified. Manual ON/ OFF operation available
 Q pot : 100 x 100st Material: NBR
 Throughput : 10 - 30 lit./ min. Discharge head: 2m
 Heat resistance : 0 - 60, indoor use
 
 Applications :
 - Collection of floating oil in the coolant tanks of large machine tools
 - Collection of floating oil in central coolant tanks and pits
 - Collection of floating oil in the drain pits and disposal plants
 
 b. SL-S type ( collection of oil scum)
 Outside dimensions : 380 x 600 x 700h ( excluding projections)
 Separating tank : 270 x 600 x 500h, weight : approx. 34kg, capacity: 65 lit.
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output : 100W, Underwater pump ( 2P)
 Controller 50 - 100% , Gearless variable speed
 Timer : Digital 24-hour time switch ( power failure guarantee) Starting times can be set up to 28 times a day ( minimum unit: 1 minute) Operating time, day, and long-term holidays can be specified. Manual ON/ OFF operation available
 Q pot : 100 x 100st Material: NBR
 Throughput : 10 - 30 lit./ min. Discharge head: 2m
 Heat resistance : 0 - 60, indoor use
 
 Applications :
 - Collection of animal and vegetable oils and grease
 - Collection of floating oil and scum in drain pits of food processing factories
 - Collection of sludge, scum, and solid bodies
 
 B. Cooking oil collecting equipment
 1. ZERO COMPO Z-025
 Outside dimensions : Main unit: 420 x 410 x 510h weight: approx. 35kg, Pump: 270 x 240 x 245h weight : approx. 5kg
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output : Suction: 100w, underwater pump ( 2P) , Stir: 40w, built-in thermal protector
 Heat-retaining heater : 300w, infrared ray type, with temperature adjuster
 Diposal tank : Effective capacity: 25 lit.
 Control panel : Sequencer control, 24-hour automatic timer operation, settings of starting time, suction time, and tirring cycle. Volume adjustment of injected biological agent Suction
 Q pot : 100 x 80st Material: NBR
 Throughput : 10 - 30lit./ min., suction head: 2m
 Heat resistance : 0 - 60, indoor use
 
 Features
 - The ZERO COMPO is compact, and can be installed in small kitchens.
 - Odors from grease traps are removed.
 - The ZERO COMPO greatly improves the quality of drainage, which contributes to the achievement of environmental standards.
 - Automatic operation saves time and labor.
 - Costs for maintenance and cleaning of grease traps are substantially reduced.
 
 Applications
 - Grease traps eateries, Restaurants, and hotels, etc.
 - Grease traps in the staff dining halls in factories and lunch providing facilities, etc.
 - Grease traps in hospitals, homes for the aged, and schools, etc.
 - Grease traps in food processing factories and packed lunch kitchens, etc.
 - Pre-treatments in drainage disposal facilities
 
 C. Floating substances collecting equipment
 1. SCOOP ROBO SR-W
 Outside dimensions : Pump unit: 330 x 250 x 350h, Separating tank: 360 x 360 x 500h
 Power source : Single phase, 100V AC, 50/ 60Hz
 Pump motor output : 150w, underwater pump ( 2P)
 Q pot : 150 x 200st Material: NBR
 Discharge : 100lit./ min., suction head: 3.5m
 Heat resistance : 0 - 40
 
 Features
 - Regardless of liquid or solid, any floating substances can be collected.
 - With the Q pot which follows the liquid level at a stroke of 200mm, liquid level adjustment is unnecessary.
 - The SCOOP ROBO is compact, and can be easily installed.
 - A compact solid substances separating box ( 360× 360× 500) is provided.
 
 Applications
 - Collection of floating substances in drainage disposal tanks and coolant tanks.
 - Collection of floating chips, scum, and grounds.
 - Collection of floating substances in the washing processes.
 
 D. Cutting fluid mixing equipment
 AUTO MIX EJECTOR AM-21
 Outside dimensions : 420 x 630 x 1140h ( excluding projections)
 Power source : Single phase, 100V AC, 50/ 60Hz
 Undiluted solution tank : 20 lit.
 Cutting fluid tank : Effective 20 lit.
 Mixture rate : 0-20% ( depends on the hydraulic pressure and undiluted solution concentration)
 Conformable hydraulic pressure : 2 - 5kgf/
 Discharge flow rate : 20 - 30lit./ min.
 Mixing capacity : 20lit./ min. ( at a hydraulic pressure of 4kg/ )
 Diameter to be connected to the water source : 20A ( 3/ 4B)
 Diameter to be connected to the tank : 32A ( 1 1/ 4B)
 
 Features
 - The AUTO MIX EJECTOR mixes cutting coolant fluids at a set concentration and automatically supplies them to FMSs and unmanned machines.
 - The AUTO MIX EJECTOR can be installed in small spaces.
 - With the high-performance MIX EJECTOR, undiluted solutions which are barely dissolved are completely mixed and cutting fluids diluted at a set concentration are supplied.
 - With an appropriate concentration of the cutting fluid, the life of tools and quality of products are enhanced.
 
 Applications
 - General machine tools and processing equipment using water-soluble cutting fluid.
 
 The Freddy Ecovac is designed to remove coolant, swarf and oil from machine tool sumps, separate the particulates and return filtered coolant for re– use or disposal.
 
 SKIMMER, OIL SKIMMER, OIL REMOVAL,
 KOWA EMTECH,
 FREDDY,
 OIL SKIMER,
 FLOATING OIL SKIMMER, BELT OIL SKIMMER,
 OIL SPARATOR,
 Absorbent,
 boom, oil, dispersant, chatcher,
 Oil absorbent,
 Sorbent, Pad, granular .