~Type: DAT-ER, FMB, SLA, APU, MTA, MTB...
2.Material: ~20CrMnTi
3.Use on milling and drilling
4.Hardness: HRC56-62°
5.Taper tolerance:6.Carbon depth: 0.8mm±0.2mm
7.Surface Roughness: Ra<0.005mm
8.Max run out: <0.005mm
9.Shank body standard: MAS 403 and B6339
10.Pre-balanced by design (8000rpm/G6.3), Through tool holder coolant capability
11.Fine balancing can be customed on demand (12000rpm/G6.3, 25000rmp/G2.5)    
12.With through hole for internal and flange coolant (AD/B) design can be customed on demand
Website: