Dia 4.0m Cr-Mo Alloy Steel Mill Lining System With HRC50 Hardness DF081
Negotiable /Piece
Min.Order:1 Piece
Wuxi Orient Anti-wear Engineering Co.,Ltd.
Hopper Car Block Liners Steel White Cast Iron For Grinding Mills
Dia 4m Cement Castings Mill Lining System With HRC50 Hardness And AK50J DF090
Raw Material Mills OEM Boltless Ball Mill Liner Cr-Mo Alloy Steel Mining Industry
High Manganese Steel Casting Sag Mill Liners High Hardness for Industry
Double-inlet & Double-outlet Coal Mill Lining System BBI4384 DF091
Dia 4.0m Cement Mill Foundry Products Alloy Steel Castings With More than HRC50
1. Better surface quality for cement mill liners;
2. High hardness: more than HRC50;
3. Higher impact value: more than 50J.
Dia 4.0m Steel Mill Liners Description:
1. Hardness: more than HRC50;
2. Impact Value: more than 50J;
3. Special heat-treatment process: Aiming at Cr-Mo alloy steel castings with higher hardness & higher impact value & even hardness distribution, we design a special quenching process, called Double-media quenching technique with water-based quenching liquid.
4. Internal Quality: we check the internal quality with UT test;
5. External Quality: we check the external quality with MT test & visual inspection;
6. Package: Packed by steel pallets.
7. We supplied the cement mill liners to Shanghai Heavy Machinery Plant & Conch Cement Group.
In the recent 20 years, our liners have been widely used in large, medium and small ball mills in Chinese power generation, mining, cement, Chemical engineering and metallurgical industries and super fine pulverizing equipments. It is the only recommended liner product in the latest standard of the electric-power industry in China.
Technical Parameters
Wuxi Orient Anti-wear Engineering Co., Ltd.
Chemical Composition & Mechanical Property of Wear-resistant Castings
Item |
Cr-Mo Alloy Steel I |
Cr-Mo Alloy Steel II |
Cr-Mo Alloy Steel III |
High Cr white iron |
High Cr Alloy Steel |
High Manganese Steel |
Ni-Hard cast iron |
C |
0.30~0.50 |
0.65~0.90 |
0.40~0.90 |
2.40~3.20 |
1.1~2.2 |
0.90~1.30 |
2.40~3.60 |
Si |
0.50~1.20 |
≤0.75 |
0.70~1.20 |
0.60~1.20 |
0.60~1.20 |
≤0.08 |
≤0.80 |
Mn |
0.40~1.20 |
0.50~1.20 |
0.60~1.00 |
0.50~1.00 |
0.50~1.00 |
11.00~18.00 |
≤2.0 |
Cr |
1.70~2.50 |
1.50~2.50 |
4.00~7.00 |
12.00~30.00 |
11.00~30.00 |
1.50~2.50 |
1.5~10 |
S |
≤0.04 |
≤0.06 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.15 |
P |
≤0.04 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.15 |
Mo |
≤0.5 |
≤0.5 |
≤0.5 |
0.10~3.0 |
0.10~3.0 |
≤1.0 |
≤0.10 |
Cu |
0.10~0.60 |
≤0.25 |
0.20~0.40 |
0.10~1.00 |
0.10~1.00 |
- |
- |
Ni |
≤0.50 |
≤0.30 |
0~0.30 |
0~0.30 |
0~0.30 |
- |
3.3~10 |
Re |
≤0.02 |
≤0.02 |
≤0.02 |
- |
- |
- |
- |
Equivalent Specifications |
DL/T 681-1999 GB/T26651-2011 |
AS 2074 L2B Mod |