Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Large - Scale Steam Brick / AAC Concrete Autoclave Φ2.68 × 31m / Pressure Vessel

Quick Details:

Heating medium: saturated steam Rail distance & height: 800×250(General) (can be design according to buyer)

Light rail: 24kg/m (China-standard) Admission direction: both middle-sides inlet

Door opening form: double upside opening Inlet pipe diameter:DN100

Plate thickness: 20mm End thickness: 26mm Designed temperature: 204 Celsius degree

Designed pressure: 1.6 Mpa Working temperature: 201 Celsius degree

Working pressure: 1.5 Mpa Hydraulic test: 2.1 Mpa

Safety valve working pressure: 1.58Mpa Working medium: saturated steam

Heating method: High temperature steam Main pressure parts: Q345R(GB713), 16MnⅡ (NB/T47008)

Designed service life: 20 Years Weight: 66Tons

The enclosure dimensions are 34m×3.3m×3.3m . (nude package)

Raw Material: sand lime brick, cement, flyash brick, slag brick, aerated concrete block, etc.

After-sales service

1. Provide reasonable suggestions for production line of autoclave of users to yield the gratest efficiency of equipments.

2. Freely direct position, installation, debugging, and on-site training to use normally, and direct users to use autoclave safely, high efficiently, and conveniently.

3. Review clients for usage of autoclave.

4. Provide quick-wear parts and spare parts .

What is AAC ?

1. Aerated Autoclaved concrete block (light block ) is the light and porous building material. It has light ,keeping temperature , Environmental protection,can\'t burn and other advantages.it has a wide prospect of market.it is the main building material in the future. it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.

2. Areated concrete common conception.Common concrete density is usually 1600-2400kg/m3,but areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:flyash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example fly ash.Mixing calcium material lime, cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.

Feature of AAC:

1. Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors!

2. Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters.AAC reduces Air conditioning cost by 30%.

3. Floor Space Area

Use of thinner blocks (6\" instead of 9\" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.

4. Earthquake Resistant

Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

5. Cost saving

Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving.Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.

Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).

6. Fire Resistant

Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.

AAC land and workshop require:

50000m3 to100000m3,workshop is 2000m2,the land is 8000m2.

150000m3,workshop is 2500m2,the land is 10000m2.

200000-300000 m3,workshop is 3000m2,the land is 15000m2.

Above please refer to ,the bigger the better.

Produ