New product, buy HTY series emergency power supply on China Suppliers Mobile

Product Details

Brief introduction

A application: EPS is reserve power supply equipment installed in buildings. When there is no commercial power in a building because of fire, accident or other emergency, EPS supplies the second way emergency power for fire-fighting identification light, headlight, and other important loads. As the increasing of building fire safety level, especially there are more high buildings, centralized power supply EPS has became indispensable equipment in buildings.

B install type embedded type; wall-hung type; console model

C reserve time 90 minutes,national standard (It can be designed by required)

D series 0.5kW~10kW

embedded type; wall-hung type; console model HTY-0.5kW,HTY-1kW,HTY-1.5kW,HTY-2Kw

console model HTY-3kW, HTY-4kW, HTY-5kW, HTY-6kW, HTY-7kW, HTY-8kW, HTY-9kW,HTY-10kW

Characteristics

1. Emergency power supply---it will supply 220V/380V 50 HZ sine three phase AC emergency power to ensure fire fighting light and other important loads working normally when commercial power is off or voltage is beyond range.

2. High performance---SPWM high frequency contra variant technology, good quality of power supply, suited for various kinds of load

3. High reliability--- advanced technology and redundant design, multi-CPU control, made by good quality component accurately, stable function and high reliability

4. Completed protection--- good overload output protection, short circuit protection, battery reverse connection protection, over discharge protection, high anti-abuse ability

5. friendly interface--- LCD display the information of working condition clearly, commercial power voltage, output voltage, current, frequency, battery voltage, on load ratio, error and etc. it can warn sound and light error, indicate error type and eliminate error noise.

6. High ability of charge--- large current charger with auto charge technology, charge in high speed, stable floating voltage

7. Simple structure--- module design, simple structure, convenient maintainance

8. Remote monitoring--- RS232 or RS485 digital communication interface, standard MODBUS communication agreement, EPS remote computer centralized monitoring and management

9 intelligent battery management--- intelligent battery monitor management components, strengthen battery monitor, lengthen battery using time and increase availability ratio

Model Introduction

kW--Rating output capacity

HTY--Hoteam single phase EPS

HTY Series EPS technology parameter

type		HTY-0.5kW	HTY-1kW	HTY-1.5/2/3/4/5/6/7/8/9/10kW
rating capacity		0.5kW	1kW	1.5/2/3/4/5/6/7/8/9/10kW
commercial power input	phase number	single phase(L-N+PE)
	voltage	165-275Vac
	frequency	50Hz
urgent output	voltage	220 Vac±3%
	frequency	50±0.5 Hz
	waveform	sina wave
	waveform distortion	≤3%(0-100%linearity onload)
	inverse efficiency	≥90%
	overload capacity	work normally when it is not more than 120% rating current
battery	type	sealed lead-acid battery, no need to be maintained
	rating voltage	48Vdc	96Vdc	192Vdc
	reserve time	90 minutes(It can be designed by required)
	charging time	within 20 hours
switching time		≤0.25s, min 2 ms()
protection		overload protection, output short circuit protection; battery inverse connection protection; battery undervoltage protection
warn alarm		battery undervoltage, battery connection error, charger error, continuous overload, inverter error, single battery voltage irregular, output shout circuit, etc.
ambient temperature		-25~55℃
ambient humidity		≤90%RH,not condensation
altitude		≤2000m(it can be used by reducing capacitor when over 2000m)
noise		no noise when it is commercial power output, not more than 55dB when it is urgent output
communication		it can be chosen RS232(two-machine communication),RS485(multi-machine communication),TCP/IP
It can be designed by required