T8 LED Glass Tube, buy Energy Saving T8 LED Glass Tube brightness For Institution Buildings on China Suppliers Mobile

Product Details

Delivery Time:20-30 working days after received your payment
Certification:CE/ROHS/ETL

Energy Saving T8 LED Glass Tube brightness For Institution Buildings

Features:
1. Perfect light quality design, system efficacy > 100lm/W , can replace traditional fluorescent tube light.
2. Very even light output, no-glare design.
3. Universal power input range of 85~265 VAC.
4. Very nice design, high quality glass material body.
5. Environmental friendly. RoHs Compliant
6. The color temperature follows ANSI C78.337 Standard.

Application:
The commercial application place where need high lux level but soft can clear light quality,
such as big shopping mall, hospital, office, factory, school, airport, etc.

Specifications:

Item No.	RE-G-T8-0.6M	RE-G-T8-0.9M	RE-G-T8-1.2M	RE-G-T8-1.5M
LED Tube	T8 tube	T8 tube	T8 tube	T8 tube
LED Chip	SMD2835	SMD2835	SMD2835	SMD2835
Power	9W	12W	18W	22W
Length	600mm	900mm	1200mm	1500mm
Light output	>900lm	>1200lm	>1800lm	>2200lm
Body Material	Glass	Glass	Glass	Glass
CRI	≥80	≥80	≥80	≥80
Color Temp.	3000K/4000K /5000K	3000K/4000K /5000K	3000K/4000K /5000K	3000K/4000K /5000K
Power Supply	AC 85-265V	AC 85-265V	AC 85-265V	AC 85-265V
Working Frequency	50/60Hz	50/60Hz	50/60Hz	50/60Hz
Power Factor	>0.95	>0.95	>0.95	>0.95
Beam Angle	>300°	>300°	>300°	>300°
Working Temp.	-10~50℃	-10~50℃	-10~50℃	-10~50℃
Working Lifetime	>25,000 hours	>25,000 hours	>25,000 hours	>25,000 hours
Certificate	CE,RoHS,ETL	CE,RoHS,ETL	CE,RoHS,ETL	CE,RoHS,ETL

Competitive Advantage:
1 high power LED source with low attenuation,
2 Low power consumption, highly efficiency, highly antistatic,
3 saving energy and protection environment,
4 long lifespan(>50.000hrs)
5 No fluorescent flickering
6 No RF interference, no buzzing noise.
7 Easy in stallation
8 No dangerous of glass broken
9 Heat resistance up to 380℃
10 No coating falling off, color change, anti back flow;
11 Explosive-proof
12 Blue-ray resistance without human hazard and provide eye protection
13 CE/ETL & ROHS approval

Light Source Test Report

Dimmension(unit:mm)

nstallation instructions

Attention
Led tube could be installed directly to replace traditional tube for the traditional T8,T10 fixtures (Just take off the Starter is ok).

Led tube must work with the correct voltage as the specification(rated voltage)Do not open the led tube by yourself.We recommend you remove the inductive ballast, for indoor use.Such led tube cannot replace emergency lightWe recommend that the suitable working temperature should be -20˚C ~ + 40˚C for our led tube, if exceed this range, will bring bad situation for product lifetime.The product installation & maintenance should be operated by professional workers
Remark:This product performance is being improved unceasingly, like has the change, not separate informs even slightly.