Optoelectronics Industries Electrostatic Eliminator , Static Elimination Bar
Negotiable
Min.Order:1
Anping Static Technology Co.,Ltd
Professional Splitting Machine Static Electricity Remover Bar With Ionizer
Ionizer Static Eliminator / Electronic Ion Volume Antistatic Bar With Electrode Tip Cleaning
High Voltage DC 5W Static Electricity Remover Ion Bar 30 - 100 mm Scope
Power Saving Fast Speed Static Eliminator Bar For Printing Machine
High Frequency DC Ion Rod Static Eliminator Bar 5W Electrostatic Discharge Equipment
Safty Micro Current Static Control Device 220V / 50HZ Static Neutralizing Bar
AP-AB1202 LCD On Bar Body Indicates Working Status Anti Static Bar For Easy Use And Maintenance
◆ Features
Bar shaped and cross over static eliminator
Manufactured by using the latest patented technology of static removing
Fast speed of static removing, low ion balance and high safet
LCD on bar body indicates working status for easy use and maintenance
Output voltage adjustable, fit for different static environment
With alarm function of ion volume, electrode tip cleaning and high voltage fault
When the machine are under working, the discharge around needle generate substantial positive and negative ions ,then any object with electrostatic pass through the ions zone ,the neutralization happened ,in other words, the electrostatic is neutralized. The static is eliminated by this way.
The dischargers produced by our factory is divide into two types ,direct type and capacitive type.but the capacitive type has following the advantages
◆ Specification
Model |
AP-AB1202 |
Output voltage |
DC±4,±4.25,±4.5,±4.75,±5,±5.25,±5.5,±5.75,±6,±6.25(KV) |
Output frequency |
0.1,0.3,1,3,5,8,10,20,30,50(Hz) |
Duty factor |
34%-64% |
Power |
10W |
Working distance |
50-2000mm |
Ion balance |
≤|±30V|(adjust) |
Discharge time |
≤2S(adjust) |
Working temperature |
0℃-50℃ |
Working humidity |
<70% |
Air pressure scope |
0.1-0.6MPa |
Cord length |
2.5m |
◆ Working Ways(AC)
◆ Elimination Effect
Testing instrument :3M-711 Static tester
Testing standard :SJ/T10694-2006,GB/T14437-97
Testing voltage :±1000 — ±100V Attenuation
Testing environment :Humidity 30%—50% Temperature 20±5℃
◆ Outline dimensional drawing
① Installation base ② Control panel ③ Bar body ④ End cover ⑤ Discharge electrode socket
◆ Positioning