Delivery Time:Within 15 days

500W Low Power UHF Terrestrial DTV Transmitter

GT-5900-500 Series

    Gospell’s GT-5900-500 Series is a low power UHF terrestrial DTV transmitter, which inherits the high performance, high stability and high reliability of Gospell’s many products. It can work in any frequency within UHF span, and the transmitting bandwidth is up to 80MHz. By incorporating our latest technologies of linear and non-linear digital adaptive pre-correction, RF delay and co-channel interference rejection, this system can fulfill the needs of single band or broadband transmission in small to medium-scale terrestrial coverage scenarios.

    This series of products, which has advance design and simplified architecture are small in size, with the advantage of lower noise, higher efficiency, and outstanding anti-interference performance. They support DVB-T/H, DTMB, ATSC, ISDB-T/Tb and DVB-T2 standards, thus having greater flexibility and suitability in actual deployment.

Main Features:

470 to 860MHz Compact structure, supporting up to 500W digital output power Linear & non linear digital pre-correction function in exciter Modular design across the whole system, easy installation, maintenance and/or upgrade Low power consumption with high efficient LDMOS amplifiers to reduce electricity costs for operators Suitable for different countries and/or areas because multiple DTT standards are complied with, including DVB-T/H, DTMB, ATSC, ISDB-T/Tb and DVB-T2 Low power consumption with linear design, further improves transmitting power and minimizes non-linear distortion, to satisfy transmission requirements of single band and broadband Built-in color TFT LCD with touch screen in front panel of rack, supports monitoring & control of working states and any malfunction for any module without additional testing/monitoring equipment required, such as transmitting power, VSWR, working voltage/current, fan speed, IP address and so on Extreme low group delay for DTV signal transmission Multiple protect mechanisms are introduced for over-load, over-temperature, over-current and high VSWR Large and dynamic Auto Gain Control (AGC) circuit ensures stability of output power Suitable for single channel or broadband transmission enabling low-cost DTV network coverage

Block Diagram:

Technical Specifications:

Universal Specifications	Ordering Codes	GT-5900-400	GT-5900-500
Output Power(RMS) *	400W	500W
Number of Power Amplifiers	2 x Power Amplifier Modules
Frequency Range(FIN)	470 to 860MHz
Channel Bandwidth	6MHz, 8MHz
Supported Standards	DVB-T2, DVB-T/H, DTMB, ATSC, ISDB-T/Tb
Transmitting Mode	Standard: Single band Optional: Broadband (maximum 80MHz)
Supported Network	SFN or MFN
Cooling Method	Forced Air Cooling
Notes: * The above output powers are calculated per ATSC/ DTMB standards under single band mode.
Main Components	Preamplifier	1 x Preamplifier module(3U)
Exciter (Optional)**	1 x DVB-T2/DTMB Exciter(modulator) (1U)
Power Splitter and Combiner	1 x Distributor & Synthesizer (3U)
Monitoring and Control Unit	1 x Monitoring control unit(2U) with 7” LCD touch screen
Bandpass Filter(Optional)	Optional Single band or broadband Bandpass filter
Notes: ** Please contact our sales representative for the other exciter/modulator requirements.
Power Supply	Power Supply	Three-Phase Option	4 wires (3-phase + neutral), 342-418V AC, 50Hz±5%
Single-Phase Option	2 wires, 190-250V AC, 50Hz±5%
Surge Protection	Built-in AC Surge Protector
Environmental	Operating Temperature	0 to 45°C
Operating Humidity	0 to 95%, non-condensing