PET Injection Machine DKM500 dakumar-m
Negotiable /Set
Min.Order:1 Set
PLATEN DIMENSION
MACHINE DIMENSIONS
DKM500 PET Injection Machine | ||||
dakumar PET Injection Molding Machine DKM500 Parameters | A | B | ||
Injection Unit | Screw Diameter | mm | 84 | 90 |
Screw L/D Ratio |
L/D | 24.6 | 23 | |
Shot Volume |
cm3 | 2420 | 2780 | |
Injection Weight(PET) | g | 2420 | 2780 | |
Injection Pressure | Mpa | 163 | 142 | |
Injection Rate | cm3/s | 512 | 588 | |
Plasticizing Capacity | g/s | 103.8 | 124.3 | |
Screw Speed | rpm | 0~155 | ||
Clamping Unit | Clamp Tonnage | KN | 5000 | |
Toggle Stroke | mm | 740 | ||
Space Between Tie-Bars | mm | 800x800 | ||
Max. Mold Height | mm | 850 | ||
Min. Mold Height | mm | 350 | ||
Ejector Stroke | mm | 200 | ||
Ejector Tonnage | KN | 150 | ||
Ejector Number | Piece | 13 | ||
Others | Max. Pump Pressure | Mpa | 16 | |
Motor Power | KW | 55 | ||
Heater Power | KW | 25.9 | ||
Machine Dimension | m | 8.4x2x2.8 | ||
Machine Weight | ton | 22.5 | ||
Oil Tank Capacity | L | 1050 |