Delivery Time:5-6 weeks
Certification:CE ASME GMP ISO9001

sanitary polished surface stainless steel mixing tank sealed single layer

Specifications

This unit is available for manufacturing liquid products (such as detergent, shampoo, shower gel, etc.) it integrates mixing, homogenizing, heating, cooling, pump discharge finished products and defoaming (optional) functions. It is the ideal equipment for liquid products in domestic and international factories.

Main technologies

1. Capacity:100L,200L,300L,500L,600L,1000L~5000L and more size .Special tank can be made customered order.
2. Heating form: it adopts heating tubes, inserting into the jacket, to achieve uniform heating, heat transfer oil or water is injected into the jacket as the heating media,thus,the thermal energy is generated to heat the material in the tank
3. Material heating temperature:≤100°c,material heating time:30min-90min(according to the production requirements)
4. Temperature control: it adopts thermocouple and temperature controller to measure and control the temperature, it also can adjust the material temperature up and down.
5. Tank:interal surface are treated by polishing, roughness Ra<=0.4Pm.
6. Top cover: With two easy-open removablecover,convenient to wash,interal surface are treated by polishing, roughness Ra<=0.4Pm.
7. Bottom tank structure angle is formed by metal spinning, no dead space remains after welding,polishing,and no material leaves after releases.
8. Jacket type:fully jacketed, used for injecting into heat transfer oil or water, to achieve the purpose of best warming up  and cooling down during working time.
9. Heat insulating material: it adopts filling pearl cotton, rock wool or polyurethane foaming to keep the temperature range from outside, thus, to achieve the heat insulation and heat preservation purpose. 
10. The shell surface treatment method: mirror polish ,2B primary colors inferior smooth or 2 B grinding surface inferior smooth processing 
11. Agitator: coping centre agitating, lapped joint is adopts to connect speed reducer output shaft and mixing paddle shaft,thus,it\'s easy to wash.  
12. Mixing RPM:15-120r/min
13. Agitator type: gate type, anchor type, paddle type, turbine type (according to the production requirements).
14. Device configuration: electric control box, temperature controller, liquid material import&export,oil spill hole,etc.
15. Material: inner tank is stainless steel 304 or 316L,Jacket:Q235-B or SUS304,outer protection shells:SUS304.
16. Flanging process arc transition is adopted for each import-export pipe orifice and inner tank welding, which makes our products easy to wash.

Advantage for liquid making machine
 

1. Completely Meet GMP

2. Using Japan NSK bearings

3. Material contact part all use SUS316L

4. Safety protecting functions, make the produce saver

5. Homogenizer\'s design mainly stem from Japanese technology.

6. Siemens Inverter, power-saving, machine-protect, keeping the machine working stably

Stirring scrap and middle stirring rotating the opposite direction make the mixing more equally

7. Burgmamn mechanical seal, seal good, long working life, keep the homogenizer work 24 hours continually.

8. Slow stirring axle adopts 2 sets of mechanical seal and 2 sets frame oil seal, make the seal saver.

9. Install a fall buffer unit on the hydro-cylinder in the hydraulic system; keep the cover up and down stable

Application

Our service

Design: Client Provide the project information and parameters, We designt he evaporator for him.

Manufacture: manufacture the product according to the design by ourselves.

Purchase: We responsible for the raw material purchasing.

Sell: Sell client the completely machinery.

After-Service: Arrange engineer come to the site for machinery installation and commisioning.

Warranty:Product waranty 12months.