Product Details

Standards
The products meet the standard requirements GB9329-88, GB/T1179-1999 or American standards of ASTM-B399 or ASTM-B711. Heat Treatment Aluminum Alloy is used on transmission line of electric power having large span run for its much higher tensile strength, although its electrical conductivity goes down 10% lower than that of aluminum product.

Designation, Type and Main Applications

Designation	Type		Main Applications
	GB9329-88	GB/T1179-1999
All Aluminum Alloy Stranded Conductor (AAAC)	LHAJ,LHBJ	JLHA2,JLHA1	Transmission of electric power having large span runs or overhead line in the heavy-ice area. Anti-corrosion types are available for coastal or corrosive areas.

using prperties:

1,Max permission operating temperature shall be not exceed 80°C.

2,Building temperature shall not be lower than-20°C.

3,The laying bending radius shall not be less than 12times the outer diameter of the cables.

Note:

1 The company can produce anti-corrosion type of AAAC in accordance with the requirements of the customer. There are for types of anti-corrosion coatings and some increments of coating weight from 2% to 50% available for the selection while placing the order.
2 The company can design some other specifications, which are not listed in the above-mentioned standards in accordance with the requirements of the customer.