Delivery Time:45days after deposit
Certification:ISO9001：2008

AAC Drying Boxes Machine Concrete Slab Making Machine / AAC Panel

Steam drying box contain anger steel, stainless steel plate and cold steel plate. The insulation layer is made of high density aluminum silicate cotton filling, high density aluminum silicate cotton to ensure the heat preservation of the oven, but also to ensure the safety of users. But the bottom heater installation position, top or sides. Intelligent digital display temperature control instrument. Steam oven air duct design has two kinds: horizontal wind and vertical wind!

The characteristics of steam oven

1, hot air circulation in the oven, high thermal efficiency, energy saving.

2, use of forced ventilation, air drying oven, uniform.

3, the oven is running smoothly and also automatic temperature control and convenient installation and repair.

4, wide application range, can be used for drying various materials, drying equipment are common ideal.

The working principle of steam oven

Steam drying box using air circulation system with fan circulating ventilation, The air circulation evenly and high efficiently. Air supply by circulating air motor (using contactless switch) drives the wind wheel through a heater, and the hot air sent through the air duct, to the oven chamber, then use the air intake duct into air again, heating. Ensure that the indoor temperature uniformity. When the swingvalue temperature caused by opening and closing action, send quickly restore the operating state of the air circulation system, until the temperature reaches the setting value

Technical parameters of steam oven

1, heating source: steam, electricity, far infrared, steam electricity.

2, using steam heating temperature: 50-140 degrees, the highest temperature of 150 DEG C.Electric heating, far infrared temperature 50-350.

3, equipped with automatic control system and computer control system.

4, common steam pressure 0.02-0.8Mpa (0.2-8kgf/cm2).

5, equipped with electric heating according to the calculation of 15kw type I, 5-8kw/h.

6, special requirements in the order indicated.

7, the temperature greater than 140 DEG C or less than 60 degrees, pls indicate when send the order.

8, the factory car baking pan, size uniform, interchangeable.

9, pan size: 460 x 640 x 45