Delivery Time:25 working days
Certification:CE/ROHS/FCC

CE approved  3.1A  Dual USB 3.1A  Car Charger for iPhone6, iPad and Android phone

1. Input Features:

      1) Rated input voltage: DC12-24V

      2) Input voltage range: DC10-28V

      3) Efficiency: 83-93.8%

2.Output characteristics:

Rated output    5VDC 3.1A	Specification limits	Remark
Min value	Max value
Unload output voltage	+4.9VDC	+5.3VDC
Full load output voltage	+4.75VDC	+5.25VDC
Output current	0	3.1A
Cc mode rate load cold ripple		mV
Over current protection		A	Adjustable
Turn on delay time		≤3S
Hold up time	8mS		Full load

3. Protective properties:

   1) Over current protection

Under any input conditions,when output current is greater than the set current,

the protection mode is on, after output current become lower than the set current, the charger will automatically restart work.

   2) Short circuit protection

Under any conditions, when short circuit occurs the protection mode is on, after short circuit disappears, the charger will automatically restart work.

   3) Over temperature protection

After the charger works for a long time, if the temperature is higher than that of IC set working temperature, the protection mode is on, if the temperature drops to IC set temperature again, the charger will automatically restart work.

   4) Over voltage protection

 When output voltage is bigger than the set voltage, the protection mode is on, if the output voltage    drops to set voltage again, the charger will automatically restart work.

4.Drop Test: Six Surface

5.Salt Spray Test: 12H

.