New product, buy Chinese fiber optic fusion splicer KL-300T on China Suppliers Mobile

Product Details

Features

-Core to core alignment by PAS technology ( PAS:Profile Alignment System)
-Digital fusion splicer with automatic focus function

-Fiber core can be display clearly
-Single X or Y view and X & Y view simultaneously
-Auto detect cleaved endface fault
-Display fiber cleaved and offset angle
-Display core and clad offset
-5.6 inch TFT color LCD monitor with clear digital image display
-USB & VGA interface
-Software upgrade via USB interface

Specefications

Model	KL-300T
Applicable fibers	SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length	8~16mm(Coating diameter:250µm) 16mm(Coating diameter: 250 ~ 1000µm)
Fiber diameter	Cladding diameter:80 ~150µm Coating diameter:100~ 1000μm
Fiber Count	Single
Fiber aligning method	Core or clad aligning
Image processing method	Digital
Actual average splice loss	0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
Splicing time	Typical 9 sec,with standard SM fiber
Splicing mode	53(templet), 40(user)
Splice loss estimate	More accurate
Return loss	>60dB
Storage of splice result	4000 results,20 parameter per result
Fiber display and magnification	300X(X or Y view),150X(X and Y view)
Tube heating time	Typical 30 sec
Tube heating mode	9(templet), 24(user)
Tube heating temperature	Can be adjusted
Applicable Protection sleeve length	60mm, 40mm and a series of micro sleeves
Tension test	2N
Electrode life	2500
No.of splice/heating with battery	Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen	5.6 TFT inch color LCD monitor
Image change over	The fiber image is turned upside down
Terminals	USB 1.1 and VGA
Operating condition	0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50℃, respectively, Max. wind velocity of 15m/s
Power supply	AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions	150mm(L) x150mm (W) x150mm (H)
Weight	2.7 Kg excluding battery,3.2 Kg including battery