Product Details

Sand Making Machine in industry
Working principle

There is two franges from verticals symmetry on both end of the shaft impact crusher,the high speed revolution roller is drived by the multiple groove pulley. Materials enter into the hopper,through the center feeder into the high speed impeller ,and speedup at more than ten times of the gravitational acceleration,Then discharged from the discharging opening.Firstly, bump some of the freely fall materials,Then impact on the material plate(stone hitting stone) or the impact plate(stone hitting iron), impact up onto the top of the flowing lumen, redirection and downward movement,Finally meet some materials from the impeller flow puth into a material layer.In this way,a big piece material through striking,rubing and crushing,the final production be discharged from the discharging opening.

Applicability

This impact crusher is widely used in kinds of mining stone,concrete,fire resistant material,bauxite hot material,emery,glass raw materials,ect,dead hard or hard special materials middle and fine crushing industry.It is widely used in hydropower,high road,building,concrete and metal mining.The production shape is cubic,low content of needle flake.it is generally used in the crushing of building sand,stone material and kinds of metallurgy pared with some other crushers,it has features of efficient production,stable and trustworthy,easy maintenance,high crushing rate.

Structure features

(1) Simple structure reasonable,low operating cost.

(2) “stone at stone” and ”stone black smith”, a tractor serves several purposes.

(3) High crushing rate,saveing energy.

(4) Fine crushing and rough grinding.

(5) Not effected of the material moisture,can be used in both dry and wet.

(6) Low operating noises,less polltion,achived national enviroment requirement.

(7) According with the dead hard and special hard materials.

(8) The final production shape is cubic,big pile density,metal pollution is minimal.

(9) Small impeller reducing wear,easy maintenance.

Structure Chart

Technical parameters

Model	Max feed size(mm)	Power (Kw)	Impeller speed(r/min)	Processing capacity(t/h)	Overall dimension(mm)	Weight(including motor)(T)
PCL-900	40	110-180	1000/1450	60-150	3600×2140×2620	13.6
PCL-1250	60	220-360	950/1200	100-200	4520×2640×3100	22
PCL-1350	60	320-440	800-1200	160-360	5300×2900×3200	26

Note:
·The picture is only for reference, please make the object as the standard.
·Technical specifications may be subject to variations without notice.