Certification:ISO9001,UL, RoHs, TS16949

Single Layer Metal Core Printed Circuit Board Manufacturing for LED Light / Control Panel

Board thickness: 1.6mm Layers: 2 Minimum line width/spacing: 4 mil Minimum hole diameter: 0.3mm Finishing copper thickness: 1oz Solder mask: black Minimum line width/spacing: 0.075mm Minimum solder mask dam: 0.075mm

Descriptions:

Metal Core PCB MCPCB is kind of PCB with metal base material instead of woven glass (FR4), cotton paper (FR3) or others. It is with single layer metal core PCB, double layers MCPCB, double sided MCPCB, COB MCPCB and multilayer MCPCB. The common used metal core is aluminum, copper and alloy. Aluminum is the most frequently used among them due to its good heat transfer ability, dissipation ability and relatively cheaper cost than copper, although which may has a better performance.

Single Layer Metal Core PCB consists of a metal base (aluminum or copper alloy), dielectric layer, and copper conductor layer. The single layer MCPCB can be used with surface mount and chip & wire components, and provides much lower thermal resistance than FR4 PCB. The metal core provides lower cost and allows much larger areas than ceramic substrates.

The prepreg dielectric provides excellent heat transfer from the foil and components to the base plate, while maintaining excellent electrical isolation. The base aluminum/copper plate gives the single-sided substrate mechanical integrity, and distributes and transfers the heat to a heat sink, mounting surface or directly to the ambient air.

Advantage:

Excellent thermal impedance - thin insulation layer with excellent conductivity, advantage for LED surface temperature. Mechanical workability - tolerance of scratch, dent, burr, drilling and cutting. Competitive price - global supply of raw material, original AL surface treatment method

About Agile Circuit

 Started from 2002, we are professional PCB supplier from China. We offer PCBs for a wide range of applications, such as telecommunication system, consumer electronics, industrial control, medical equipment, and other electronic fields.Agile support printed circuit boards from single layer to high layer by prototype and medium production.

Specification:

Base material: Aluminum, Copper, Iron Alloy

Thermal Conductivity (dielectrial layer): 0.8, 1.5, 2.0, 3.0 W/m.K.

Board Thickness: 0.5mm~3.0mm(0.02\"~0.12\")

Copper thickness: 0.5 oz, 1.0 oz, 2.0 oz, 3.0 oz, up to 6 oz

Minimum Conductor Width/Spave: 0.1mm

Outline: Routing, punching, V-Cut

Soldermask: White/Black/Blue/Green/Red Oil

Legend/Silkscreen Color: Black/White

Surface finishing: Immersion Gold, HASL, OSP

MCPCB Type: Single layer MCPCB, double layers MCPCB, double sided MCPCB, COB MCPCB, multilayer MCPCB

Mfg Volumes: Prototype, Small, Medium,