Delivery Time:Small quantity (within 20 pieces ) can be ready with 5-8 working days.
Certification:CE, RoHS

PD-14024 Digital Led Controller Set Lighting Time for Machine Vision Inspection

Product Features

◆  With PD-14024, the lighting time can be set during external trigger signal input for strobe lighting,. 
◆ The PMW frequency can be changed, avoiding the rippling problem.
◆ Lock setting function.Medical-grade switch.DIN rail mounting.

◆ Small size, light weight, flexible installation.
◆ Manual knob setting 256 levels of light intensity precisely.
◆ ON/OFF control: (1) External trigger signal input.
                               (2) Command input via EIA-485 communication.
◆ When external trigger signal input is used, high or low levels can be flexibly
 applied and the specified external control cable is recommended .
◆ Power cut memory function, short-circuit protection and warning function

Model No. Demonstration:

PD-	60	24	-	4
Series	Power	Output voltage		No. of channels

*Feature:24V/digital light intensity cotrol/compliance with RoHS directive/wide voltage 110-240V/Over current protection/Powerboot restore.

Specification:

Model	PD2-6024-4	PD-6024-6	PD-14024-2
Lighting Method	Constant lighting / strobe lighting
Drive method	Constant voltage system
Light control method	PWM control and lighting time control
No. of channels	4	6	2
PMW Frequency	62.5KHz,125KHz, 250KHz, 500KHz
Error Detection Display	Front-pannel digital display
Over Current Protection	Activated when output current overload 7% or more,reset by reopening the power supply
Input Voltage (rated)	AC 100V-240V
Trigger Function	Yes
Trigger input voltage	5-24v
Output Voltage (rated)	DC 24V
Output Current (rated)	Each channel:2A	Each channel:5.8A
Output Power	60W	140w
Lighting Delay	10µs max
Operating Environment	Temperature: 0 to 40℃, Humidity: 20% to 85% RH ( with no condensation)
Storage Environment	Temperature: -20 to 60℃, Humidity: 20% to 85% RH ( with no condensation)
Cooling Method	Nature Air Cooling	Forced Air Cooling
Material &Surface Processing	SPCC Spray Painting
Weight	1040g	1980g
Standard Accessory	EIA-485 communication cable (standard length 3m),EIA-485 to RS232 adoptor, AC power cable
Optional Accessory	trigger input cable, RS-232 to USB serial cable
	Specification of control units with EIA-485 comunication protocol
Light intensity setting	Manual setting: any of 256 levels on the front panel
	External command input via EIA-485 communication  protocol
ON/OFF Setting	External trigger input or command input via EIA-485
Lighting Mode Setting	Manual Setting: any of 11 levels on front-panel setting switch(F00-F10)
	External command input via EIA-485 communications
Error Detetion Output	Activated when overload current output is detected
External Control Connector	Trigger input:MIL connector,10 pins
Lighting Intensity/ Lighting Mode Setting:e-CON connector 3 pins

Dimension Diagram

Accessories

1.External trigger input cable (Model TRI-3)--Optional Accessory.

External trigger signal connection example.                         

External trigger input e