Pipe Jacking Machine TBM

Pipe Jacking System

System Description

This slurry balance type Pipe Jacking Machine (TBM) is used for underground trenchless pipelines laying for swage and drainage.

It has various advantages like high efficiency, no effect on the traffics on surface, good for the environment and it can lower the cost of the construction.

Realtop Heavy Industry Co., ltd could supply you all kinds of pipe jacking machinery from diameter 450mm to 4500mm.

Specification
Fit in soft soil, clay, sandy soil, gravel soil, hard soil, etc. wide range of soil body.
2.Breakage ability strong, breakage particle size big and number more.
3.With independence water and slurry injecting system and washing clean device for cutter in particular, fit for big N value hard soil.
4.Jacking speed is very fast, theory maximum speed 120mm/per minute.
precision high, may correct an error from up and down, left and right. Maximum corrective angle is 2.5, and may jack forward in a long distance.
6.Adopt ground operation system, safety, intuition and convenient.

Technical parameters of a hot model for you reference:
DG1400-QNP

Inner diameter (mm) 1400
Outer diameter (mm) 1720
Total length (mm) 3800
Electromotor Power (kW) 45
Cutterhead Torque (kN·m) 81.8
Cutterhead Rotating Speed (r/min) 5.25
oil cylinder of rectifying (Qty) 4
Thrust Force (kN) 1000
Stroke (mm) 60
Rectifying Angle (°) ±2
Electromotor Power (kW) 1.5
Work Pressure (MPa) 25
Water Supply Pump Power (kW) 22
Mud Pump Power (kW) 37 KW (22KW+15KW)
Diameter of Side Mud pipes (mm) 100
Jacking Speed mm/minï 0--80
Work Pressure (MPa) 31.5
Rated Jacking Force kN.m 2000/4
Timing Way Adopt Frequency Control
Total Power (KW) 18.5KW