Tungsten Steel Square CNC End Mill , High Feed End Mill with 2 - 6 Flute
Negotiable /Set
Min.Order:1 Set
Dongguan Diamond Hardware Factory
Four Flute End Mill Square Diameter 5mm End Mill with Air or Oil Cooling Mode
6 Flute Square End Mill with 55 - 65 HRC Hard Milling End Mills
Diamond Coated End Mills , 6 Flute End Mill for Slotting / Milling
2 Flute Square End Mill High Speed Steel End Mills for Roughing To Finishing
Square High Performance End Mills 4 Flute End Mill HRC 55 / 60 / 65
6 Flute End Mill , HRC 55 - 65 Square Aluminum Cutting End Mills
Tungsten Steel Square CNC End Mill , High Feed End Mill with 2 - 6 Flute
Description:
It is 2 flute carbide end mill which is suitable for hardened steel milling, exhibiting excellent wear resistance at high-speed cutting specially.
Owing to the adoption of original design against chipping, stable high quality and efficiency is possible.
And also, long time tool life is guaranteed for precision milling of various kinds of dies
The surface roughness of machined surface by 2/4-flute cutting edge is excellent, and it is long tool life
We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills with very strong abrasive resistance and impact strength.
Original raw micro grain material, high hardness and T.R.S.
1, Co: 10-12%, WC: 88-90%,
Grain size: 0.2-0.6μm,
Hardness: 92.5-94.0 HRA,
T.R.S.: 4200-4800 N/mm2,
Density: 14.3-14.8 G/cm3
2, We got 250T Extruder, 10MPa Overpressure Sintering Furnace-Vacuum
Dewaxing, these two equipments are very very important for manufacture and high quality carbide rods.
3, We use our own carbide rod for 90% of cutting tools.
4, We have introduced advanced CNC grinding machines in operating,Rollomatic,Schneeberger from Switzerland, ANCA from Australia, Zoller from German,KEYENCE from Japan,set up(Japan FANUC, brother processing center) tool laboratory test cut.Our technology from Taiwan.Guarantee high precision and good performance.
5, Helix Angle: 38-42 °(we could do 4 of them are 37°)
Diameter of cutting edge: 1-25mm
Diameter of rods: 4-25mm
Length: 50-150mm
Cutting Form: Ball nose, Corner Radius, Taper Flute, etc.
Flutes No.: 2-6
Super coating
TiSiN TiAlN AlTiN or TiCN ,
improve tool life, reduce the coefficient of friction.
Applications:
Copper, Aluminium Alloy , Cast Iron, Carbon steel, Tool steel,
Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.
Price Performance Ratio:
From tungsten powder to end mills, that\'s the reason of our competitiveness!
Make sure about each piece end mill has a good quality,high precision and good performance.
More discount will be offered according to exact quantity.
Welcome to be our agents, OEM is also available.
Specifications:
Model NO. |
Diameter/D1 |
Flute Length/L1 |
O.A.L/L3 |
Shank Dia/D2 |
JT2010 |
1.0 |
3 |
50 |
4 |
JT2012 |
1.2 |
3 |
50 |
4 |
JT2015 |
1.5 |
4 |
50 |
4 |
JT2015-75 |
1.5 |
4 |
75 |
4 |
JT2020 |
2.0 |
5 |
50 |
4 |
JT2020-75 |
2.0 |
5 |
75 |
4 |
JT2025 |
2.5 |
7 |
50 |
4 |
JT2025-75 |
2.5 |
7 |
75 |
4 |
JT2030-3 |
3.0 |
8 |
50 |
3 |
JT2030 |
3.0 |
8 |
50 |
4 |
JT2030-75 |
3.0 |
8 |
75 |
4 |
JT2030-100 |
3.0 |
8 |
100 |