Features
CO2 laser is a gas laser, which produces a wavelength of 10.6μm, belonging to mid-infrared band; CO2 lasers are relatively large and higher power conversion efficiency, which is the largest power of a laser.
CO2 laser ,with CO2 gas as the working substance, fills the CO2 and other auxiliary gas into discharge tube, when the electrode voltage discharge generated heightening glow discharge, we can release the gas laser, laser energy will be amplified after releasing , that can be laser processing. Laser power, power is controlled by software, continuously adjustable.
1, laser power of high
2, power is controlled by software, continuously adjustable
3, wider the scope of marking
4, mark a clear, easy to wear, cutting efficiency is high
5, engraving free to control the depth
6, processing costs are low, without supplies
Prinziple:
1. Laserbeam
2. Beam shaping unit
3. Output mirror
4. Cooling water
5. RF excitation
6. Cooling water
7. Rear mirror
8. RF excited discharge
9. Waveguiding electrodes
The optical resonator is formed by the front and rear mirrors and two parallel RF-electrodes. Excitation of the laser gas takes place in the RF field between the water-cooled electrodes. The heat generated in the gas is dissipated by the water-cooled electrodes (diffusion-cooled). A beam shaping module is integrated into the laser head and produces a high quality round symmetrical beam.
Application materials and industrial applications
A variety of non-metallic materials can be carved. Applied to leather, denim, glass, acrylic, wood, epoxy resin, unsaturated resin material, widely used in leather, wood, fabric cutting, textiles, plastics, signage, architectural ceramics, medicine, rubber products, beverage packaging, crafts, gifts, electronic components, communications, watches, glasses, printing, shell plate, decoration and other industries. Graphics marked are clear beautiful, no supplies, stable performance, maintenance-free of machine will last 80,000 hours.
Technical parameters:
Maximum laser power: 300W
Laser wavelength: 10.64μm
Laser repetition frequency: ≤ 50kHz
Standard engraving range: 1000mm × 1000mm
Engraving depth: ≤ 10mm
Engraving line speed: ≤ 7000mm / s
Minimum line width: 0.1mm
Minimum characters: 0.4mm
Repeat accuracy: ± 0.01mm
Total Power: 3.6KW
The demand for electricity: 220V / single phase / 50Hz / 3A
