Delivery Time:15 to 25 days according to your order quantity
Certification:TUV, SGS, ISO9001

Galvanized Zinc Plated Locking Washer For Bolt and Screw Spike Hardness 43 - 47

A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID). Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied. Type Demension Weight (Kg/Mpcs) Spring wsaherFe6(UIC864-3) diam: 25 90 Spring washer AREA67 7/8 90.55 Spring washer AREA67 1 152.33 Spring washer AREA67 1-1/8 187.65 Plain pattern washer 7/8 70.46 Plain pattern washer 1 78.03 Plain pattern washer 1-1/8 85.32 Flat washer ULS6 47/23/4 41 Flat washer ULS6 50/25/4 42

Type	Demension	Weight (Kg/Mpcs)
Spring wsaherFe6(UIC864-3)	diam: 25	90
Spring washer AREA67	7/8	90.55
Spring washer AREA67	1	152.33
Spring washer AREA67	1-1/8	187.65
Plain pattern washer	7/8	70.46
Plain pattern washer	1	78.03
Plain pattern washer	1-1/8	85.32
Flat washer ULS6	47/23/4	41
Flat washer ULS6	50/25/4	42