Delivery Time:15 working days after received deposit
Certification:CE/ISO 9001

Vibratory Finishing Machine High quality with CE and ISO certification.

1. Adoption of vibratory locus theory of 3-dimensional curve, it makes work part and medias interactively mass finished.

2. Applicable to process small and medium size work part in large amount load, and working efficiency is improved to 6-10 times compared with traditional finishing methods.

3. No damage to the original shape and size of work part.

4. Random checking the work part in the finishing process.

Technical Specifications

Type	capacity	motor	electricity	motor speed	process bowl width	lining thickness	size(LXWXH)	weight
(L)	(KW)	(V/HZ)	(r/min)	(mm)	(mm)	(mm)	(kg)
HXZP -B150	150	2.2	380/50	1440	220	6-20	1060X1030X850	350
HXZP -B200	200	3.0	380/50	1450	260	8-22	1200X1180X920	500
HXZP -B300	300	3.7	380/50	1450	285	8-22	1330X1330X1000	760
HXZP -B400	400	3.7	380/50	1450	330	8-22	1450X1440X1030	900
HXZP -B600	600	5.5	380/50	1450	380	10-25	1880X1850X1340	1400
HXZP -B900	900	11.0	380/50	1450	455	15-30	2160X2160X1400	2000

1. Structure:

Vibratory finishing machine is composed of inertial vibrator, vessel, electrical cabinet and basement.

Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.

Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of work pieces on vessel.  

Electrical cabinet: Operate the machine by buttons on the control panel.

Basement: It is weld of steel, and it has springs to hold the vessel.

2. Function:

Vibratory finishing machines are suitable for deburring, descaling, edge radiusing, chamfering, polishing, surface improvement, pre plating finishing all types of components including fully machined parts in metals & plastics

3. Working Principle

Vibratory Finishing Machine for Metal Working has a ring chamber to hold abrasives (stones) and work pieces. When the machine is working, it makes three-D high frequency vibration. The grinding stones and the work pieces are rolling spirally forward and they are grinding each other during the rolling.

This makes the work pieces de-burred, chamfered, polished and clean. To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.