Model No.:Q, QG, JG
Product Origin:China
Brand Name:XIANFENG
Price Terms:
Payment Terms:
Certification:
Description:Working principle: The damp raw material through conveyer and heated fresh air enter into the drier at the same time. They are mixed fully. Because the area of heat exchange is large, the purpose of evaporation and dry can be realized in a short time. The dried finished product is discharged from cyclone separator. Small parts of powder dust can be recovered and used through cyclone separator or bag duster. Model Q air stream is operated at negative pressure. The raw material does not pass through fan. Model QG air stream drier is operated at positive pressure. The raw material passes through fan with the effect of crushing. Model FG air stream drier is tail air circle type. Model JG air stream drier is a reinforced type. It integrates flash dry and air stream dry into a whole, and is also the newest style of drier designed and manufactured by us. Features: 1) The drying strength is large and investment of equipment is saving: the treating amount of air stream drier is the largest. The evaporated moisture capacity of equipment manufactured by us will be 50-150kg/h. Volume of equipment is small and the investment is saving 2) Automatic content is high, and the quality of product is good. Raw material to be dried is inside the pipe, the drying time is short (0.5 - 2s), so that automation can be realized. The raw material cannot contact with outer substances, so the pollution is small, and the quality of product is good 3) Equipment will be supplied completely and the heat source can be chosen freely: air stream of drier will be supplied completely. The basic type consists of filter, heater, feeder, drying pipe, fan and cyclone separator. Customer can install duster and other auxiliary equipment in accordance with practical conditions On the choice of heating way, air stream drier has wide suitability. Customer can choose steam, electricity and air-heated furnace to heat in accordance with practical conditions. Meanwhile, it should be chosen in accordance with the temperature of raw material to be resisted (or temperature of hot air): if ≤150oC, choose steam to heat; if ≤200oC, electric or steam and supplemental electric or heat conduct oil; if ≤300oC, coal air-heated furnace; if ≤600oC, oil air-heated furnace should then be selected.