Delivery Time:20-25 working days after receiving advance payment

2 Core Flat Cable Terminal Automatic Wire Crimping Machine Cut Strip Crimp Wires

Description:
 

Wire stripping and pressure connection are completed once for all.
Equipped with automatic air blowing and oil feed unit,blockage by scrapped materials can be reduced and service life of blade can be prolonged.

Saved 3-5 labor which including wire stripping twice, insert in wires to terminal ends, punching & cutting the connecting part.

 
Applicable cable:
 
SPT-1.SPT-2,NISPT-1.NISPT-2,VFF,HVFF,VCTFK,,H03VVH2-F,H05VVH2-F,RVV(It can\'t be commonly used for single and double insulation cables).

 
 
Quick Detail:
 

Place of Original	Dongguan Guangdong China(Mainland)
Brand name	Senjia
Usage	Crimping
Color	White
Certificate	CE
Feature	Full-automated

 
 
Specification&Parameter:
 

Model of machine	SD-3000B
Pressure connection speed	2,300~2,400pcs/hour
Punching Force	3T
Holding force on plug range	80-250N
Stripping length of outer jacket	As per customer’s requirements can be adjusted
Stripping length of conductor jacket	As per customer’s requirements can be adjusted
Voltage	AC220V/50Hz
Pressure of air source	0.5~0.8Mpa
Weight	275kg
Dimension	830mm*490mm*1,470mm

 
 
Features:
 
1, Integrating function of wire cutting, striping, splitting and crimping into one machine；
2, If no wire on the crimping position of machine, the feed of terminals will automatically stop to avoid the waste of materials；
3, Saving manpower and energy,effectively improve production capacity to 2000-2300 piece/hour by one operator with one machine；
4, Lower work related injury rate compared with previous operation mode；
 
 
Preparation before operation:
 
1, Properly lubricate all lubrication points of machine;
2, Check if the screw of the upper and lower riveting blades at the crimping position is fully fastened;
3, Check if the air pressure reaches over 4.5KG/cm²;
4, Check if the position of feeding terminals is correct;
5, Check if material scraps have been cleared away;
6, Check if any abnormal sound heard from machine motor or other mechanical parts when stepping down the pedal switch after start-up of machine.
 
 
Products showing:
 

 
Applicable Terminal :