Delivery Time:5 working days
Certification:CE, FCC, IP65

Simcom300 120V Satellite Messenger Mini Spy SMS GPRS GPS Pet/location tracker

1 Summary

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.

2 Applications

l         Rental vehicle / Fleet management etc

l         Protect the child / the old / the disabled / pet etc

l         Protect businessmen

l         Personnel management

l         Covert Tracking

3 Hardware Descriptions

3.1 Front Face                          3.2 Rear Face

Content	Specs.
Dim.	64mmx 46mmx 17mm(1.8”*2.5”*0.65”)
Weight	50g
Network	GSM/GPRS
Band	850/1800/1900Mhz or 900/1800/1900Mhz
GPS chip	SIRF3 chip
GSM/GPRS module	Simcom300/Simcom340
GPS sensitivity	-159dBm
GPS accuracy	5m
Time To First Fix	Cold status  45s Warm status  35s  Hot status  1s
Car charger	12—24V  input       5V   output
Wall charger	110－220V  input        5V   output
Battery	Chargeable changeable 3.7V 800mAh Li-ion battery
Standby	48hours
Storage Temp.	-40°Cto +85°C
Operation Temp.	-20°Cto +55°C
Humidity	5%--95% non-condensing

5 Usage

5.1 SIM card installation

Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message must in Text format, can’t be identified for PDU format.

Steps:

1 Open the rear cover, and pick out the battery.

2 Push the foil along and turn it left.

5.2 Battery and Charger

Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first use, the battery can be charged fully in 3-5hours.

Cautions:

a: For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t bump, puncture it violently and keep it off fire.

      b:Please charge the battery in time to keep it working normally.

5.3 Startup

l         Put the SIM card and battery in place.

l         Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.

l         For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)

l         In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on.

l         When this unit receives GPS signals normally, you can use it and do all the following settings.

5.4 Initialization

Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (default password: 123456)

5.5 Change the Password

Send SMS password+old password+space+new password to change the password.

Remark:

5.5.1Be sure keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password.

5.5.2Make sure the new pass