Delivery Time:7-15 Days
Certification:CE, ISO, RoHS
Low Frequency Uninterrupted Power Supply with Pure Copper Isolation Transformer 10K - 200Kva
Model: Low Frequency Online UPS High Efficiency Strar Series HE33 10K-200K ( 3Ph in / 3Ph out )
Key Features
● DSP control
● Double CPU control
● Modularize
● Battery can be sharing
● Up to 8 units in parallel
● Compatible with generator
● Manual maintenance bypass
● Wide input voltage range
● High output power factor
● Strong environmental adaptability
● Advanced battery management
● N+X parallel redundancy
● Strong shock resistance ability
● EPO function
● Full protection against over-discharge, overcharge, over load
Application
Large-medium computer data center, industrial process and other mission-critical equipment
Technical Specification
| High Efficiency Strar Series HE33 10K-200K | |||||||||||
| Model | HE33 Series UPS | ||||||||||
| Capacity (VA) | 10K | 15K | 20K | 30K | 40K | 60K | 80K | 100K | 120K | 160K | 200K |
| Noninal output capacity | 8KW | 12KW | 16KW | 24KW | 32KW | 48KW | 64KW | 80KW | 96KW | 128KW | 160KW |
| Operate type | Double conversion online type | ||||||||||
| Input | Nominal voltage | 220V/380, 230/400, 240/415V | |||||||||
| Voltage Tolerance | 380/400/415V±25% | ||||||||||
| Frequency | 50Hz/60Hz±5% | ||||||||||
|
Permitted Frequency Tolerance |
±2% (selectable from ±1% to 5% from the front panel) | ||||||||||
| Soft start | 0-100% in 30\" (selectable) | ||||||||||
| Input power factor | 0.95(with input filter) | ||||||||||
| Standard features | Back Feed protection separable bypass line | ||||||||||
| Phase | Three phase +N+G | ||||||||||
| Output | Voltage | 220V/380, 230/400, 240/415V, ±1% (stable load), ±5%(active load) | |||||||||
| Frequency | 50/60Hz (±5%, AC mode), 50/60Hz (±1%, Battery mode) | ||||||||||
| Static stability | ±5% in 19ms | ||||||||||
| Distortion | Linear load <3%, non linear load<5% | ||||||||||
| Power factor | 0.8 | ||||||||||
| Output wave | Pure sine wave | ||||||||||
| Crest factor | 3:01 | ||||||||||
| Battery voltage | Standard battery voltage | 384V | 432V | 480V | |||||||
| Floating charge | 432V | 486V | 540 | ||||||||
| Terminal voltage | 336V | 378V | 420V | ||||||||
| Charge current | 1A-50A (Can calculate and set according to battery configuration software) | ||||||||||
|
Maximum Discharge Current |
28 | 42 | 56 | 85 | 113 | 169 | 225 | 282 | 338 | 381 | 507 |
| Main Function | Active voltage change | 0-100%±5% | |||||||||
| Instant recover time | <10ms | ||||||||||
| Imbalance voltage | <±5%,<±1%( Balance load voltage) | ||||||||||
| Overload capacity | 125%→10min,150%→1min | ||||||||||
| Static switch | Automatic | ||||||||||
| Protection | UPS over current, short circuit, battery low voltage, over heat | ||||||||||
| Cold method | Compel aeration ( temperature control mode) | ||||||||||
| Noise | 60-65dB | ||||||||||
| Display | LED,LCD display | ||||||||||
| Remote signalling | Voltage-free contacts | ||||||||||
| Remote commands | EPO and bypass | ||||||||||
|
Communication Port (Optional) |
double RS232 + remote contacts + 2 communication interface slots | ||||||||||
| Alarm | Alarm with buzzer and indicators | ||||||||||
