work principle
vertical vibration motor as the excitation source, the motor and lower ends mounted eccentric weight, the rotary motion of the motor into a horizontal, vertical, inclined three dimensional movement, then the motion transfer to the screen surface. The regulation, the phase angle and lower ends, you can change the trajectory of the screen surface material in.

features
☆ high efficiency, compact design and durability, any powder, mucus can be screened. 
☆ Changer easy, simple operation, easy to clean. 
☆ mesh is not blocked, the powder is not flying, can be screened to 400 mesh or 0.028mm. 
☆ impurities, coarse material discharged automatically, continuous operations.

installation and commissioning
1. Equipment shall be the basis of stability. When the equipment is installed on the general ground or cement foundation, you can not set the anchor bolts. When the equipment is installed on top of the steel structure of the gantry, the application bolt on the structure, but there should be a steel gantry steel degrees. 
The machine only a three-phase switch (Note: It is best to use electrical control panel), with snakeskin pipe threading, the motor can be connected to the power supply, that the electrical control panel should be installed on a wall hanging. 
2. The factory (two) devices will screen installed properly, the process of using a screen replacement may themselves be replaced. 
Before (three) boot, you should first check the tightness of all bolts, and whether various spout position catcher on the positive, and see if the vibration motor can rotate properly and the spring force or without obstacles, check the layer mesh are pressed. 
3. Before vibration sieve access electrical control panel, you should first check the electrical control panel. Line after turning observe whether the vibration motor rotation direction is clockwise (Note: otherwise should change the phase sequence) is functioning properly, there is no different noise. 
4. Adjusting the phase angle of the upper and lower eccentric vibration motor block to accommodate a variety of materials screening situation.

 
If you want to know more information about our product, please reference