Delivery Time:after deposit 15-20 days
Certification:ISO9001-2008

One / Single Sided Wall Formwork For Concrete Pouring Of Dam , Pier , Guy Anchor

Project:	Xihoumen Bridge(Zhejiang,China)
Client:	CRBC, Second Highway Enginering Bureau
Date:	02/2011
Formwork  Type:	Auto-climbing formwork Climbing formwork
Comments of client:	We chose Zulin, because it offered the best solution for our project. All demands and our requirements were taken into consideration right down to the smallest detail. We like working with Zulin systems as they are intelligently design, offer a high degree of safety and provide fast cycle times.

 Introduction

Single-side climbing formwork DXB-180 & DXB-240 are based on the DP-180 & DP-240 system, 

which are in similar structure. DXB-180 & DXB-240 are mainly used in concrete pouring of dam, pier, 

guy anchor, concrete protecting wall, tunnel, underground workshop and so on. Because the concrete

 lateral pressure is entirely supported by anchor system and bracket, the wall-through tie-rods and 

additional reinforcement are not needed. The construction is easy, rapid and economical; the surface 

of the concrete is smooth. They are perfect formwork systems for single-sided walls.

DXB180	DXB240

 The Adjustment Of Inclination(DXB-180 system can be inclined by adjusting pull-push prop.

The maximum angle is 30°) 

Characteristics 

1. The lateral pressure of the concrete is entirely supported by the anchor system. Hence, wall-through 

tie-rods are not needed, and the finished concrete is perfect.
2. The formwork can move backward entirety, which will be convenient for work. 
3.Couplings are used for connecting the formwork units to make sure they keep a straight line. 
4. The connecting components have a high level of standardization and universality.
5. The formwork  can stick to the concrete tightly, which means dislocation and leakage can be avoided.
6. The formwork can be adjusted horizontally or vertically whenever it is necessary.
7. DXB-180 system can be adjusted to lean forward or backward, and the maximum inclination is 30°