Spectacle Blind Flanges
-
Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back again. Bleed rings provide a means to release pressure from the pipe through a controlled opening.
- Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
- Alloy Steel: ASTM A182 F1,F5/a,F9,F11,F12,F22,F91
- Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
-
Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
- Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
-
Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
-
Carbon Steel: ASTM A105, A350 LF1,LF2 CL1/CL2 LF3 CL1/CL2, ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70
- Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
- Alloy Steel: ASTM A182 F1,F5/a,F9,F11,F12,F22,F91
- Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
- Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
-
Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back again. Bleed rings provide a means to release pressure from the pipe through a controlled opening.
-
Carbon Steel: ASTM A105, A350 LF1,LF2 CL1/CL2 LF3 CL1/CL2, ASTM A694 F42,F46,F48,F50,F52,F56,F60,F65,F70
- Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)
- Alloy Steel: ASTM A182 F1,F5/a,F9,F11,F12,F22,F91
- Duplex&Super Duplex Steel: ASTM A182 F51/UNS S31803,F53/UNS S32750 F55/UNS S3260
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.
- Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)
- Special Alloy Steel: Monel400,Inconel 600, Inconel 625, Inconel 800, Inconel 825
- Ideal for higher pressure and temperature applications for small pipe sizes
- Not recommended for larger loads, especially when subjected to higher torque
- Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded.
- They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible.
- They are ideal for small diameter piping applications.
- They are economical and time saving devices.
- These threaded flanges are normally designed for non-cyclic applications.
- The flanges are suitable to be used in applications where welding is hazardous.
- They can be used in highly explosive areas.