5V, 2A IEEE802.3 2 SFP Ports & 4 RJ45 Ports Fiber Optic 10 / 100 / 1000M Media Converter
Negotiable /Kilogram
Min.Order:1 Kilogram
Shenzhen WEDFV Technology Co.,Ltd
50,62.5 / 125m Ethernet Fiber Optic Media Converter with IEEE802.1d Spanning Tree Standard
Intelligent 10/100M fiber optic to ethernet media converte with two ports, half duplex transmission
Tamper resistance IEEE802.3u Ethernet Fiber optic Media Converter / Fiber Optic Equipment
IEEE802.1p QoS Fiber Optic Media Converter with Single mode - SC / FC fiber port
IEEE802.1q VLAN 10/100M fiber optic Media Converter with 100 / 120Km dual - fiber single - mode
850nm / 1310nm single-mode IEEE802.3x Flow control Fiber Optic Media Converter
Features:
1. 4-Port 10/100/1000M UTP ports and two 1000M SFP ports
2. Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
3. Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
4. The SFP slot supports 1000M and Full Duplex mode.
5. Supports IEEE 802.3x flow control and broadcast storm protection.
6. Supports VLAN and QoS.
7. Supports max 10K bytes frame.
8. Low power consume (5W), low heat, and good reliability.
Specifications:
Operating standards | IEEE802.3/u/z/ab,10/100/1000Base-T and 1000Base-SX/LX |
MAC address table | 1K |
Frame buffer memory | 1MKb |
Switching capacity | 12G |
Connector | UTP RJ-45,10/100/1000Mbps |
SFP slot | 1000Mbps |
Cable | UTP: Cat.5 or 6 UTP(the max distance up to 100m)Multimode Fiber: 50/125,62.5/125μm(the max distance up to 224/550m)Singlemode Fiber: 8/125,8.7/125,9/125μm(the max distance up to 10~100 km) |
Flow control | Full Duplex: IEEE802.3x flow controlHalf Duplex: back pressure flow control |
LED | PWR,F1 Link/Act,F2 Link/ActTP1~TP4 Link/Act,TP1~TP4 100,TP1~TP4 1000 |
Power Requirement | AC220V(100-240V),50~60Hz DC: 5V,2A |
Ambient Temperature | 0 ~ +50°C |
Storage Temperature | -20 ~ +70°C |
Dimensions | 40mm x 110mm x 140mm |