The structure of our Coriolis Mass Flow Meters was consisted of a pair of bended tubes. The principle is to detect Coriolis force forced a pair of tubes from inner mass flow by fluid.
Our Coriolis Mass Flow Meters offer direct mass flow, volume flow, density, and temperature measurement of liquids and slurries — without the need for additional equipment, manual calculations, or estimations.
| Items | Technical Parameters | ||
| Operatingcondition | Medium | Liquid (including all kinds of serous fluid and mixed liquid) | |
| Fluid temperature | -40℃~+200℃ | ||
| Ambient temperature | 0℃~+40℃ | ||
| Density range | 0.2 g/cm3~3.5g/cm3 | ||
| Environmental humidity | ≤90% RH, non condensation | ||
| Operating pressure | ≤ 4.0MPa | ||
| Atmospheric pressure | 86kPa~106kPa | ||
| Mass sensor | Model number | FHC-CMF I-DNXX | |
| Mass flow accuracy | ±0.2% | ||
| Mass flow repeatability | ±0.1% | ||
| Density accuracy | ±0.002g/cm3 | ||
| Temperature accuracy | ±1℃ | ||
| Measured pipe materials | 316L stainless steel | ||
| Contact modes | Flange or thread connection | ||
| Explosion-proof types | Essential safety | Exib[ib]IIBT4 | |
| Composite | Exdib[ib]IIBT4 | ||
| Mass transmitter | Model number | FHC-CMF I | |
| Output of current | 4mA~20mA | ||
| Output of frequency /pulse | 0Hz~10kHz | ||
| Power supply | 24V DC or 220V AC±10%, 50Hz±5% | ||
| Power consumed | <15W | ||
| Explosion-proof types | Essential safety or Composite | ||
| Contactor capacity of the batch Control relay | 24V/0.1A | ||
| Display | Display the instantaneous flow and flow cumulative flow, temperature, density and so on | ||
| Contactor form | All-time open (can be changed to all-time close according to users) | ||
