STB-500L Vacuum Emulsifying Machine / Circulation Vacuum Emulsifying Mixe
 
 
Quick Detail:
 
STB Vacuum Emulsifying Machine introduction of foreign advanced technology, cosmetics, ointments, paste process of making products specifically designed, the crew from the pre-cookers, vacuum emulsifying stirring pots, vacuum pumps, hydraulic systems, taking material systems, electrical control systems, platforms, and other parts.  
 
Description:
 
During the mixing operation, the outer frame agitator rotates clockwise slowly. With the attached Teflon blades, the materials are scraped off the vessel wall and move upwards so they won’t always stick to the wall and burn.
 
At the same time the inner straight impeller rotates counter clockwise slowly and moves the cream downward into the high speed homogenizing and emulsifying zone.
 
Because of the two opposite forces by center agitator and wall scraper, the cream rolls over the vessel from top to bottom and back to top repeatedly. When the cream is completely mixed, the heat from the jacket is quickly transferred to every part through the inside wall.
 
The heart of vacuum emulsifying mixer is homogenizer (emulsifier) which consists of one high speed rotor and one holed stator. The rotor is driven by the motor and rotates at the speed of 3000rpm producing strong suction force. The materials go into the rotor from both top and bottom and are cut, sheared and smashed through the shear gap between the rotor and stator. Then they’re accelerated to jet out through the holes on the stator.
 
The above three types of slow and high forces repeat and repeat. And the cream can be circulated inside the vessel and mixed, dispersed, emulsified and homogenized evenly. 
 
Water ring type vacuum pump (–0.097Mpa) is powerful to pull out the bubbles generated during mixing, dispersing and homogenizing. It also helps transfer the ingredients from the oil and water phase tanks to the main emulsifying mixer. The small quantity powders are also sucked by vacuum to avoid dust.
 
Oil hydraulic pump is used to lift the cover of main emulsifying mixer. Safety devices are equipped to guarantee that the mixing part won’t start when the cover is lifted. 
 
Specifications: