Delivery Time:Within 15 days

3KW UHF Terrestrial Transmitter

Product overview

      Gospell’s GT-5900-3000 is a high power air cooled UHF terrestrial DTV transmitter which combines up to four power amplifier modules with a maximum 3000W of output power. It has superior performance and enhanced efficiency by adopting a series of technologies. It can work in any frequency within the UHF span, and the transmitting bandwidth can be up to 80MHz.

      This series of products has an optimized design in forced air cooling and architecture, with lower noise, higher efficiency and outstanding anti-interference performance; GT-5900-1600 series can support a wide range of Digital Terrestrial Television (DTT) standards, such as DVB-T/H, ATSC, DTMB, ISDB-T/Tb and even the latest DVB-T2 standards.

      By incorporating our latest technologies of linear and non-linear digital adaptive pre-correction, RF delay and co-channel interference rejection, this system fulfills the needs of single band or broadband transmission in medium to large-scale terrestrial coverage scenarios.

Main Features and Benefits:

High Performance

Supports 3000W of digital output power for DVB-T/DVB-T2/ISDB-T standard

Optimized structure design, with lower noise, higher efficiency and outstanding anti-interference performance

High Flexibility and Stability

Modular design across the whole system, easy installation, maintenance and upgrade

Optional 1+1 redundant exciters and Preamplifiers

Multiple protection mechanisms are introduced for over-load, over-temperature, over-current and high VSWR

Large and dynamic Auto Gain Control (AGC) circuit ensures stability of output power

Improved power efficiency thanks to linear and non-linear Digital Adaptive Pre-correction

High Adaptability and Availability

Suitable for different contries and / or areas because multiple DTT standards are complied with, including DVB-T, DVB-T2, ATSC, DTMB and ISDB-T/Tb

Available in single and three phase power grid environments to meet different requirements of deployment

Wide range of working frequency from 470MHz to 860MHz

Lower CAPEX/OPEX

Improved ratio of cost to performance, lower CAPEX for operators

Low power consumption with high efficient LDMOS amplifiers to reduce electricity cost for operators

Reduced investment in manpower, benefits from convenient local monitoring and management through built-in touch screen display or remote monitoring via SNMP network management and/or telcom wireless network

User Friendly Monitoring Interface

Built-in color TFT LCD with touch screen in the front panel, supports monitoring & control of working states and any malfunction on any module without additional testing/monitoring equipment required, such as transmitting power, VSWR, working voltage/current, fan speed, IP address and so on.

Block Diagram:

Technical Specifications:

Items	Ordering Codes	GT-5900-800	GT-5900-1000	GT-5900-1200	GT-5900-1600
General Parameter	Output Power(RMS)*	800W	1000W	1200W	1600W
Number of PAs	3	4
Number of Power Supplies	3	4
Weight	230Kg(507 lbs)	250Kg (551 lbs)
Frequency Range(FIN)	470 to 860MHz
Channel Bandwidth	6MHz, 8MHz
Supported Standards	DVB-T2, DVB-T/H, DTMB, ATSC, ISDB-T/Tb
Transmitting Mode	Standard: Single band Optional: Broadband (maximum 80MHz)
Supported Network	SFN or MFN
Cooling Method	Forced Air Cooling with top-mounted ventilation flue
Dimensions (W x H x D)	650mm x 1700mm(35U) x 1000mm (25.6’’ x 66.9’’ x 39.4’’)
Notes: * The above output powers are calculated per ATSC/ DTMB standards under single band mode.
Main Components	Preamplifier	1 x Preamplifier module(3U)