Delivery Time:10 working days after received your payment
Certification:CE/ROHS/FCC/SGS

Smart RFID card dispenser TCD-720M for parking lot entry

Instructions

      It is a classical mechatronics product, which has become into industrial standard actually. Its usability and reliability get from customers’ long time suggestion and manufacturer’s improvement and accumulation. TCD card machine is mainly used in parking entrance card dispenser, phone card automatic vending machine, ticket vending machine, all kinds of smart card vending and so on.

Main Characteristics

 Industrial design, adjust to high temperature and other bad environments;  Simulated manpower friction card issuers ,better adaptability to various deformed cards;  Watchdog of hardware and embedded operating system to ensure properly running;  Pre-dispense function accelerate dispensing speed;  Connectable with the vehicle detector to achieve card issuing and “one car, one card”;  Automatic buzzer alarm when no cards, fewer cards or failure.  Provide both RS232 and I/O voltage control interface;  Automatic buzzer alarm when errors occur, automatic reset after 100 seconds alarm;  Capacity of card stacker is more than 40pcs, automatic buzzer alarm when the withdrawing stacker is full;  Slide card stacker with a capacity of 40pc;  Adjustable of card stacker with a capacity of 120pc each;  Automatic withdrawal to prevent card lost (only for TCD800F series  Slide design to make installation and disassembling easier;  Molded production to ensure high consistency of precision and quality.

Control interface

This dispenser provides both I/O and RS232 interface of power level. PWL control interface is led by standard 12pin (2.54mm) socket CN3of the control board, RS232 control interface is led by the standard 3pin (2.54mm) socket CN7.

TTL control interface(CN3)                                 

Pins	Signal Description	Pins	Signal Description
1	-24V	7	VD
2	+24 VDC	8	Callback
3	0V	9	OutOK
4	Payout	10	Lower
5	Reset	11	Error
6	0V	12	Empty

(2)RS232 Control Interface

Pins	Signal Description	Signal Description
1	GND	Ground
2	RXD	RS232 receive port
3	TXD	RS232 send port

(3) DIP settings and the function definition(CN9)

DIP1	ON	pre-read issuing card
OFF	directly issue card
DIP2	ON	OUTOK as the getting card signal
OFF	OUTOK as the card on signal
DIP3	ON	ignore VD input signal
OFF	input VD signal
DIP4	ON	forbid recovering overtime 100s
OFF	Allow recover overtime 100s