Steel Cement Mill Liners For Shipment And Ball Mill With HRC50 DF068
Negotiable /Piece
Min.Order:1 Piece
Cement Mill Lining System With HRC50 Hardness And AK50J DF072
Ball Mill Liners DF009 Mill Liner Design And Installation With HRC50-55 Hardness
No Leakage Cr-Mo Steel Boltless Mill Lining System With Easier Installation DF083
Alloy Steel Mill Liners For Ball Mills With More Than HRC50 Hardness DF070
Predominantly Pearlite Cast Steel Mill Liners For AG Mills DF073 With HRC33~42
Cast Liners for Cement Mills for Shipment Feature:
1. Internal Quality: the alloy steel mill lining passes the UT test;Cast Liners for Cement Mills for Shipment Description:
1. Hardness: more than HRC50;
2. Impact Value: more than 50J;
3. Special heat-treatment process: Aiming at Cr-Mo alloy steel castings with higher hardness & higher impact value & even hardness distribution, we design a special quenching process, called Double-media quenching technique with water-based quenching liquid.
4. Internal Quality: we check the internal quality with UT test;
5. External Quality: we check the external quality with MT test & visual inspection;
6. Package: Packed by steel pallets.
7. We supplied the cement mill liners to Shanghai Heavy Machinery Plant & Conch Cement Group.
Technical Parameters
Wuxi Orient Anti-wear Engineering Co., Ltd.
Chemical Composition & Mechanical Property of Wear-resistant Castings
Item |
Cr-Mo Alloy Steel I |
Cr-Mo Alloy Steel II |
Cr-Mo Alloy Steel III |
High Cr white iron |
High Cr Alloy Steel |
High Manganese Steel |
Ni-Hard cast iron |
C |
0.30~0.50 |
0.65~0.90 |
0.40~0.90 |
2.40~3.20 |
1.1~2.2 |
0.90~1.30 |
2.40~3.60 |
Si |
0.50~1.20 |
≤0.75 |
0.70~1.20 |
0.60~1.20 |
0.60~1.20 |
≤0.08 |
≤0.80 |
Mn |
0.40~1.20 |
0.50~1.20 |
0.60~1.00 |
0.50~1.00 |
0.50~1.00 |
11.00~18.00 |
≤2.0 |
Cr |
1.70~2.50 |
1.50~2.50 |
4.00~7.00 |
12.00~30.00 |
11.00~30.00 |
1.50~2.50 |
1.5~10 |
S |
≤0.04 |
≤0.06 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.15 |
P |
≤0.04 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.15 |
Mo |
≤0.5 |
≤0.5 |
≤0.5 |
0.10~3.0 |
0.10~3.0 |
≤1.0 |
≤0.10 |
Cu |
0.10~0.60 |
≤0.25 |
0.20~0.40 |
0.10~1.00 |
0.10~1.00 |
- |
- |
Ni |
≤0.50 |
≤0.30 |
0~0.30 |
0~0.30 |
0~0.30 |
- |
3.3~10 |
Re |
≤0.02 |
≤0.02 |
≤0.02 |
- |
- |
- |
- |
Equivalent Specifications |
DL/T 681-1999 GB/T26651-2011 |