Electric Sliding Gate Brush Gear Motor Low Noise Nylon Gear 50HZ​

Description:

A gate operator is a mechanical device used to open and close a gate, such as one at the end of a driveway.As its name implies, a slide gate either slides on wheels from left to right or right to left, not unlike many department store automatic doors. Electric Slide gate operators are commonly installed at the end of the gate in the closed position but can also be installed by the end of the gate in the open position. 

Specifications:

Motor Performance:

Applications:

This kind of brushless dc motor can be widely used for Electric Sliding Gate Openers 

Competitive Advantage:

Automatic Safety Reverse – Garage Ace sensors when someone or something is in the way, and reverses automatically.

Manual Override - Motor can be easily disengaged in the event of power failure for manual operation of door.

Handy Wall Switch - Door can be operated from switch on interior mounted control box independently of remote transmitter.

Automatic Run Time - If motor is activated while disengaged, the auto run time will turn motor off after 30 seconds

DIY Installation - Step-by-step instructions will guide you through installation. the opener can be installed on the left or right-hand side of the door.

Quiet Operation - No need to let the neighborhood know when you come and go!

Safe and Secure - High security rolling code transmitters. Two remotes supplied.

Courtesy light -Comes on automatically when the door is in use. The light will stay on for approximately 3 minutes, then turns off automatically. 

Motor drawings: