304 Stainless Steel Pass Thrus 220V/50HZ Cleanroom Pass Boxes, Pass Through For Biological Pharmacy
 
 
Quick Detai For Cleanroom pass box  :
External Size: 700x600x690mm
internal size :600x600x600mm  
Interlocker : Mechanical or electronic
Material: inside is SUS304/201. Outside is steel with power coated 
Material thickness : 1mm/1.2mm
UV Light : 1 pcs
Power: 220V/50HZ
 
 
Introduction:
 The stainless steel clean room pass box adopts the SUS304 stainless steel as the material for interior and exterior product body and the two doors. The thickness of the stainless steel is 1.0/1.2 mm. Meanwhile, the product is equipped with the  ultraviolet lamp with the power of 10W and the wavelength of 254nm. It can get the ideal sterilization effect. In addition, the embedded type installation of ultraviolet lamp can reduce the contact possibility of delivered articles and ultraviolet lamp tube to ensure safe use.
 
 
operating features :
 
 1: C leanroom pass box is manufactured for the most demanding controlled environment applications.
 2:  All components are designed for maximum chemical resistance and enhanced durability for
     a long service life.
 3:  It is constructed of stainless steel inside, making the work zone easy to clean and endurable. 
 4: Fool proof Mechanical and electric interlock are reliable, maintenance-free, maintains clean
     room integrity by preventing both door from being opened and the same time.
 5: Contamination-free transfer of materials in and out of the cleanroom
 6: Cleanroom pass box  should be eliminates unnecessary personnel entry
 7: Full range of sizes meets any application
 8: Stainless steel doors, latches and hinges extend service life—a must in a production environment!
10: Material options accommodate many application requirements, from chemical resistance to 
      static control to fire safety.
 11: Fully-welded type 304 finish stainless steel construction
 12: Smooth-ground crevice-free continuous seam welds throughout the interior and exterior
 13: Service access via removable flush mount side panels secured by hex head stainless steel hardware
 

 
Technical Parameter:

 
 Note : 
 
 Cleanroom pass box allow products to enter a cleanroom without human traffic that
increases particle loads and slows operations. Clean Air Products offers a broad range of
pass-thru cabinets, and our staff of experts will ensure you get the best product for your needs.
 
 
Consider the following options in making your selection:
 
 
Wall or Floor Mount? 
 
Wall-mount models can be positioned at a comfortable standing height;
floor-mount models include a low-profile ramp to allow carts to be wheeled into the chamber.
Special mounting hardware is included for each model. Order support brackets for larger
wall-mount models (see illustration above). Your wall cutout should be .5\" (13 mm) larger
than the overall height and width of your chamber.
 
Pass-Through Chamber Material?
 
Select among seven standard materials. Others (including
polycarbonate and dissipative polycarbonate) are also available.
 
Sliding Doors?
 
These easy-open doors eliminate clearance requirements.
 Reinforced Doors—Plastic cabinets come with stainless steel reinforced door frames on a standard basis.
 
Other cleanroom pass box Through Options:
 
it is  include a filter/blower module, shelves (with electropolished
stainless steel racks), illuminator, and grounding terminals.
 
Factory test: 
 
All of equipment is individually factory tested for safety and performance in accordance with international Standards. Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.
Factory test include:
-- func