Delivery Time:Depend on the order and destination
Certification:CE, SGS , ROHS

30KW Ultrahigh Frequency Induction Heating Equipment For Welding

Quick Detail:

Name	30KW Three phase Ultrahigh Frequency Induction Heating Equipment For Welding	Application	Hot forging, hot fitting, smelting, surface quench, welding, annealing
Work power	360V-520V	Out power	30KW
Product size	main: 560*260*560mm transformer: 390*260*370mm	Certificate	CE , SGS , ROHS

Specification

Model	GYH-30AB (Three phase)
Work power	360V-520V
Maximum input current	45A
Output power	30KW
Fluctuating frequency	50-200KHZ
The flow rate of cooling water	0.2Mpa,  6L/min
Water temperature protection point	40C
Product size	main: 560×260×560 mm transformer:390*260*370mm
Net weight	main: 29kgs transformer: 24kgs

Major Features

30KW Ultrahigh Frequency Induction Heating Equipment For welding adopts Soft-switch ultrahigh frequency technology and two poles closed loop control technology; and our company fully owns the independent intellectual property rights

Fluctuating frequency can be 100K-1.5MHZ, control the depth of surface quenching, which can totally replace the high frequency of vacuum tube.

30KW Three phase Ultrahigh Frequency Induction Heating Equipment for welding can continuously work for 24 hours, and 100% duty cycle.

Parts of power devices are all from well-know brand products

Ultra-small size and weight; High efficiency, energy saving and environmental protection with safety.

Major Scope of Application

Quench for shaft, gear and inner hole of mold, quenching depth can be within 2mm.

Carbon steel and stainless steel screw coating

Continuously quench for saw blade, anneal and quench fro stainless steel, alloy steel thread.

Welding for hard alloy saw blade, reamer, communication cable joint, and filter capacitor.

Welding for joint of metal tube, and continuous welding of stop valve.

Operating Principle

Frequency conversion electromagnetic induction heating or induction heating for short is a method for heating metal materials by converting power frequency power supply into that of specific range based on the principle of electromagnetic induction. It is mainly applicable to the metal hot working, heat treatment, welding and melting. This type of heating technique is also applicable to packing industry (such as sealing of aluminum foil used in medicine and food industry), semiconductor material (such as extruded monocrystalline silicon and heated affixing metal parts for auto glass). 

Basic components of induction heating system include induction coil, AC power source and work pieces. Induction coil can be fabricated into different shapes as per different heated objects. The coil is connected with the power source providing alternating current for coil. The alternating current possessed by the coil can create a alternating magnetic field passing through the work pieces to produce eddy flow as required by heating.

Advantages of Induction Heating Equipment

1. Fast heating: the minimum rate of heating is less than 1 second (rate of heating is available for adjustment and control).

2. Wide coverage of heating: it can be used to heat various metal parts (replace removable induction coil as per different operating switches).

3. Easy installation: it can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.

4. Easy operation: you can learn to operate it within several minutes.

5. Fast start-up: it c