Stainless Steel Cover LED PAR LED Bulb Waterproof For Swimming Pool Lights
Negotiable /Set
Min.Order:1 Set
Thicker Glass LED Pool Lamp , Swimming Pool IP68 Waterproof Lamp
Waterproof PAR LED Lamp , Glass Cover 18W - 40W Swimming Pool Lights
ABS LED Underwater Swimming Pool Lights 12W / 25W / 40W For Concrete / Vinyl Pools
Dia.250mm / 280mm Underwater Swimming Pool Wall-Mounted Light With Controller
12W / 18W LED Underwater Swimming Pool Lights Thin Type ABS / Plastic RGB Waterproof
IP68 Underwater Swimming Pool LED , Dia 250mm 230mm S.S.304 Halogen Light
Stainless Steel Cover LED PAR LED Bulb Waterproof For Swimming Pool Lights
Description:
1,Ideal replacements for traditional incandescent swimming pool lamps which are simple direct replacement for your existing PAR56 lamp
2, It is built into a leakproof UV-resistant housing 100%waterproof
3,Easy installation; high brightness
4,Wide bram angle
5,Low voltage AC12V power supply,Safety and reliability when used underwater
6,Widely used in garden fountains, squares water surface, water column, spray etc.
Applications: Swimming pool,park, water fall, fountain spring,garden, rockwork, yard, etc.
Advantages:
1, Our led swimming pool light has certificates: CE, IP68 waterproof rate for swimming pool.
2, No mercury and lead pollution, no UV and IR Radiation.
3, Low heat, low degradation, 3%~5%(3000hours), life span:50000Hours
4, Energy Saving, Environment Friendly.
5, Easy installation, maintenance free of our LED swimming pool light
6, Replace PAR56 300W traditional halogen light.
Instructions of remote control
1) Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB
2) Continu pressing the button “B” to make the 3 group led change in 3 modes:
1.RGB gradient change
2.Disco mode
3.Blinking change
3) Pressing button “C” to adjust the speed of “A” and “B”
4) Pressing button “D” to switch on/off the led light
5) It will reset in 5 seconds after power off
6) The remote control can operate many led lights synchronously
Installation procedure
1.Screw the bracket into the wall
2.Mount the clip of the bracket into the hole of the light
3.Screw the detailed illustrations in the below pictures
PAR56S-LED12W | 12V/12W 12*1W single color led light, stainless steel cover |
PAR56S-LED12C | 12V/12W 12*1W RGB led light, stainless steel cover |
PAR56S-LED18W | 12V/18W 18*1W single color led light, stainless steel cover |
PAR56S-LED18C | 12V/18W 18*1W RGB led light, stainless steel cover |
PAR56S-LED27W | 12V/27W 27*1W single color led light, stainless steel cover |
PAR56S-LED27C | 12V/27W 27*1W RGB led light, stainless steel cover |
PAR56S-LED36W | 12V/36W 12*3W single color led light, stainless steel cover |
PAR56S-LED36C | 12V/36W 12*3W RGB led light, stainless steel cover |
PAR56S-LED54W | 12V/54W 27*2W single color led light, stainless steel cover |
PAR56S-LED54C | 12V/54W 27*2W RGB led light, stainless steel cover |
PAR56S-LED81W | 12V/81W 27*3W single color led light, stainless steel cover |
PAR56S-LED81C | 12V/81W 27*3W RGB led light, stainless steel cover |