Delivery Time:3-10working days
Certification:TUV CE

Vertical Women CO2 Fractional Laser Machine Far-Infrared For Skin Rejuvenation

Application

1. Skin renewal and regeneration

2. All colors tattoo removal

3..Remove all kinds of wrinkles

4. Remove acne and scars

5. Remove neoplasms

6. Remove pigment

7.Treat telangiectasis

8. Sun damage recovery and skin renewing

9. Actenic keratoses

10. Face lift, tighten and whiten skin

11. Pierce ears

12. Effective treatment with skin hydroponic, skin rough 

Specifications

General Specification	Wavelength	10.6μm, far-infrared laser
Aiming Beam	Less than 2mW, red semiconductor laser
Scan Mode	Laser Energy	5-45mj, step value 5mj
Figure Option	1. Square or rectangle, min 3×3mm; max 20×20mm, step value 1mm. 2. Round, min 3mm (diameter), max 20mm (diameter), step value 1mm. 3. Ellipse, min 3×8mm, max, 15×20mm, step value 3mm.
Energy Repeat	1-5 (When increasing energy repeat, laser energy is increased synchronously, max total energy 225mj.)
Dot Density	36/49/64/100/144/225 dots in 1cm2
Mode	Normal: scan sequentially line by line. Random:scan randomly, to decrease thermal accumulation. This function is not available for rectangle.
Normal Mode	Laser Energy	1-30W, step value 1W
Super (Pulse)	1. Average power: 1w~30w; 2. Pulse frequency: 300Hz~950Hz optional
Single(Pulse)	1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional
Continuous Wave	1w~30w
Repeat	1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional,off time1ms
Dimension	73*66*130cm
Weight	50Kg

Advantages: 

1. The TUV medical CE approved; 

2. Normal and scan mode for choice;

3. Far-infrared laser Aiming beam

4. metal Tube is imported from U.S.A 

5. The lifetime of the machine is more than 20,000 hours

6. Fan cooling, do not need to add water.

7. Particular designed intelligent laser control system ensures a precise treatment

8. RF-exited CO2 laser energy shooting is an even steady and safe treatment process.

9. Wide range application, effective treatment

CO2 Fractional Laser System fires a laser beam which is then split into numbers of microscopic beams, producing tiny dot, or pixel-like treatment zones within the selected target area of the skin, leaving the other zones within it perfectly intact. Therefore, the heat of laser only passes deeply through the factional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.

1. Skin with problems before treatment                                            2. Fractional laser works on the skin

3. Thousands of mirco-thermal zones are                                     4. More collagen is produced during

    produced activate skin resurfacing.                                               self-resurfacing.

Before and after pictures