Optimal Working Pressure(BAR/PSI): 3-5/45-80

Pattern Width(CM): About 10

Air Consumption: 2-4cmf

Capacity Of Cup(ML):Aluminum 200ml

Nozzle Size: 0.5

Feed Type: Gravity

Air Inlet:1/4(bsp/nps/npt)

 ST-R2 MiNi Air Spray Gun Use For Industrial Car Piant Funiture Paint:

Assembly Drawing : 

Parts List
Part	Description	Qty.	Part	Description	Qty.
1	Air Nozzle	1	22	Trigger Valve Assembly	1
2	Nozzle Retainer	1	23	Trigger Valve Bushing	1
3	Fluid Nozzle	1	24	Trigger Valve O-Ring	1
4	Body	1	25	Trigger Valve Housing	1
5	Needle Packing	1	26	Trigger Adjust Bushing	1
6	Needle Packing screw	1	27	Trigger Valve Adjust Knob	1
7	Trigger Bearing stud	1	28	Fluid Adjusting Valve Assembly	1
8	Trigger	1	29	Fluid Needle	1
9	Trigger Circlip	1	30	Fluid Needle spring	2
10	Trigger seal	1	31	Fluid Needle spring	1
11	O-Ring	1	32	Fluid Valve Fastener	1
12	Trigger Packing	1	33	Fluid Valve Control Knob	1
13	Trigger Return Spring	1	34	Air Adjusting Valve Assembly	1
14	Air Valve seat	1	35	Air Valve seat	1
15	Air Valve shank	1	36	Air Ball Valve	1
16	Air Needle Valve Assembly	1	37	Fluid Valve O-Ring	1
17	Air Needle	1	38	Air Valve Bushing	1
18	Air Needle Bushing	1	39	Air Valve Fixing sleeve	1
19	Air Needle spring	1	40	Air Valve Control Knob	1
20	Air Needle spring seat	1	41	Paint Cup Nipple	1
21	Trigger Valve spring	1	42	Air Line Nipple	1

Tool use and care:

A. Use clamps or another practical way to secure and support the workpiece to a stable platform.  Holding the work by hand or against the body is unstable and is able to lead to loss of control.
B. Do not force the tool. Use the correct tool for the application.The correct tool will do the job better and safer at the rate for which the tool is designed.
C. Do not use the tool if the trigger does not turn the tool on or off.Any tool that cannot be controlled with the trigger is dangerous and must be repaired.
D. Disconnect the tool from the air source before making any adjust- ments,changing accessories, 
or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally. 
Turn off and detach the air supply,safely discharge any residual air pressure, and release the trigger before leaving the work area.
E. Store the tool when it is idle out of reach of children and other un- trained persons. A tool is dangerous in the hands of untrained users.
F. Maintain the tool with care. Keep tools clean for better and safer performance.Follow instructions for
lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, 
have them repaired by an authorized technician.The handle must be kept clean, dry, and free from oil 
and grease at all times.