Main Products: 
Air suction feed spray gun for painting cars or wood preservative spray gun 2.0mm nozzle
Negotiable /Piece
Min.Order:1 Piece
Quick Details View All >
0.5mm Nozzle 750ML Cup Paint gravity feed spray guns for furniture , housing
House Paint High Pressure Spray Gun air pressure , latex paint spray gun 1000ml
Mini Suction Feed High Pressure Spray Gun , air compressor spray gun 1000ml
Suction Feed Plastic Low Pressure Spray Gun air pressure for spray painting
Aluminum 750ml Cup Low Pressure Spray Gun for home painting with CE
House Low Pressure exterior wall painting spray gun with 1000ml Cup , 1.3mm Nozzle
Product Details
Specification:
| Optimal Working Pressure(BAR/PSI): | 4-8/60-115 |
| Pattern Width(CM): | About 22 |
| Air Consumption: | 7-12cmf |
| Capacity Of Cup(ML): | Aluminum 1000ml |
| Nozzle Size: | 2.0-2.5-3.0 |
| Feed Type: | Suction |
| Air Inlet: | 1/4(bsp/nps/npt) |
Feature :
Optimal Working Pressure(BAR/PSI):4-8/60-115
Pattern Width(CM):About 22
Air Consumption:7-12cmf
Capacity Of Cup(ML):Aluminum 1000ml
Nozzle Size:2.0-2.5-3.0
Feed Type:Suction
Air Inlet:1/4(bsp/nps/npt)
Inlet interface: quick connectors
Two sections of the trigger, the first period of purging, the second period of the paint
Adjustable spray painting, adjustable for vertical, horizontal, or other point of view
Volume control knob size adjustable gas flow
Spray painting, control knob adjustment can make the spray painting into a round or oval
Applicable water-based, oil-based paint
A full set of configuration are: spray gun, a pot, specifications, special spanner, brush a Main application:
mainly used in the middle, bottom, viscosity of coating, such as automobiles, machinery
ST-770S Explosive Viewing:
ST-770S Air Piant Spray Gun :
Spray guns are most suited to spraying cellulose paint but can be used for emulsion and oil-based paints as well – sometimes, these require a different nozzle.
Most spray guns can also be used for spraying insecticides and wood preservatives. In all cases, cleaning out the gun thoroughly after use is essential.
In order to get a good finish, a spray gun has to produce a good spray pattern which is broad and even and fades away evenly (and quite sharply) at the top and bottom enabling you to pass along the surface in only slightly overlapping bands. Fan-shaped nozzles tend to produce a more even spray than the usual round ones. The paint must be properly atomised, that is have small evenly sized particles which just blend together to form a uniform coat of paint. How well a spray gun atomises the paint depends partly on the design of the gun. but it is also affected by the viscosity (thickness) of the paint being used the thicker the paint, the more difficult it will be for the gun to break it up into small particles. If the paint is too thin, it may not cover the surface properly.
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln